peter lena 8,583 #1 Posted December 4, 2019 recently used a 600 # grit sandpaper to clean up my plow blades , then used SNOW JET POLYMER AEROSOL SPRAY as the wet sand lubricant , the result , was like magic in rolling snow and tractor effort.i will be doing my 36-42 snow blower today in chute and auger tip areas . there is no snow drag or stick at all , its like gaining horse power and plowing ease. easily worth a try , remember to lightly sand off the crud on your blade and lubricate it as you go along . i love plowing snow , pete 2 Share this post Link to post Share on other sites
ebinmaine 67,292 #2 Posted December 4, 2019 7 minutes ago, peter lena said: SNOW JET POLYMER AEROSOL SPRAY Good info there. I'll check it out. Thanks Pete. 1 Share this post Link to post Share on other sites
Stepney 2,325 #3 Posted December 4, 2019 I always soak mine with PAM cooking spray, I've tried he SnoJet too though, In my eyes they seem to work about equal. 2 Share this post Link to post Share on other sites
lynnmor 7,302 #4 Posted December 4, 2019 56 minutes ago, Stepney said: I always soak mine with PAM cooking spray, I've tried he SnoJet too though, In my eyes they seem to work about equal. If we could get ours hands on the recalled Pam cans that explode by golly we could move some snow! Exploding PAM 2 Share this post Link to post Share on other sites
Thegearhead0324 1,255 #5 Posted December 6, 2019 I'm recently using fluid film, sprayed all on the blade and also on all the moving parts, used as a lubricater and for the snow to fly off. Share this post Link to post Share on other sites
