N875ED 98 #1 Posted December 4, 2019 What's the consensus about mounting a Class III or IV receiver to the rear of a Uni-Drive axle? Who sells them? I specifically want a 2" receiver tube so I can either mount a carrier basket on the rear or an offset hitch with 2" or 1-7/8" ball. 1 Share this post Link to post Share on other sites
ebinmaine 67,292 #2 Posted December 4, 2019 Lots of us have em... Wheelhorse parts and more sells them. Not sure who else. I use mine ALOT. Share this post Link to post Share on other sites
CCW 1,292 #3 Posted December 4, 2019 Made my own and mounted it. Wanted to move the trailers. 1 Share this post Link to post Share on other sites
953 nut 55,092 #5 Posted December 4, 2019 I have one on the 1055 and love it. great for moving trailers and even better for adding a weight box for added traction. You can buy them from Lowell, one of our vendors. https://www.wheelhorsepartsandmore.com/hitches-liftkits.html#!/Hitches-&-Rock-Shaft-Kits/c/23548047/offset=24&sort=normal 1 Share this post Link to post Share on other sites
Lee1977 6,647 #6 Posted December 5, 2019 I build mine one braces off the wheel horse hitch the other off the top of the transmission. Now I need to build one for my 520-H. Share this post Link to post Share on other sites
Sparky-(Admin) 21,311 #7 Posted December 5, 2019 Bought mine from a Red Square vendor, www.wheelhorsepartsandmore.com If your not a fabricator with a welder (I'm not) this is the way to go. All the research and development has been done by someone else for a seemless install. 3 Share this post Link to post Share on other sites
