Bow_Extreme 544 #1 Posted December 1, 2019 Anyone have any idea what these actually belong to? I picked them up today. They are 83 lbs. each. They fit inside a 12” wheel. Just wondered if anyone has seen a set like these. 3 Share this post Link to post Share on other sites
ebinmaine 67,502 #2 Posted December 1, 2019 Never seen a set like that . I'd love to own them. That's a good pile of weight to add. Hand made one-of-a-kind? 1 Share this post Link to post Share on other sites
Sparky-(Admin) 21,318 #3 Posted December 1, 2019 They almost look homemade to me. But if they fit a 12” rim that great! Having 83 pounds per rear rim would be great for traction. I’m running two separate wheel weights and only getting 75 pounds per rim. 1 Share this post Link to post Share on other sites
Bow_Extreme 544 #4 Posted December 1, 2019 I thought the my were homemade too but they seem to be casted this way. That center hole picture has a vertical slit in the weight almost like an anti-rotation design. Share this post Link to post Share on other sites
bds1984 1,429 #5 Posted December 1, 2019 They must be factory made. I have seen many sets of these for sale over the years this size and a few half the thickness but the same style. These are probably just a generic set and at 83 pounds, I'd just clean them up, paint them, and then put them on your plow rig. 1 Share this post Link to post Share on other sites
Pullstart 62,882 #6 Posted December 2, 2019 That was a great deal, from Floyd’s? Share this post Link to post Share on other sites
