poodle 0 #1 Posted April 20, 2009 hey fellas I had another idea for my plow machine for the snow next years snow season.Does any one know if Chevy five lug rims fit the wheel horse five lug hubs? Share this post Link to post Share on other sites
TT-(Moderator) 1,131 #2 Posted April 20, 2009 The bolt pattern is 5 on a 4 Share this post Link to post Share on other sites
Kelly 1,029 #3 Posted April 20, 2009 The only Gm's I can think of are front wheel drive, W body, like monty carlo, grand prix, lumina, some of the mini vans, and I think the H body, deta 88's, bonivilles, some caddys, and more I'm sure but as I said they a front drivers, so they have alot of offset, but the spare tires have less, but are narrower. 1 Share this post Link to post Share on other sites
Kelly 1,029 #4 Posted April 20, 2009 Oh ya AMC and some Chy. products use that bolt pattern. Share this post Link to post Share on other sites
Sparky-(Admin) 21,314 #5 Posted April 21, 2009 Anyone have a picture of car rims on a WH? Wouldnt a set of aluminum slots look great ! Mike........ Share this post Link to post Share on other sites
Sarge 3,463 #6 Posted April 21, 2009 Worst part is backspacing, most car rims are 3.75-4.25" . Most WH rims I've measured are 1 3/8" to 2" for later models . There are custom steelies out there mostly made for offroad stuff, got a set of 2" backspaced US Wheel D spokes on my old Sami , 15x8" . Sarge Share this post Link to post Share on other sites
Kelly 1,029 #7 Posted April 21, 2009 In a old post a guy had GM alum. front driver wheels on his horse, had to take the fenders off. Share this post Link to post Share on other sites
HORSEOFCOURSE 0 #8 Posted April 21, 2009 maybe you could bolt some steel ones on backwards off from a front drive car and put hubcaps on them to hide the backwards wheel :omg: Share this post Link to post Share on other sites
jusjeepn 59 #9 Posted April 22, 2009 I had a pic of some Jeep (chrysler) after market wheels on a Cub 100. 31x10.50x15's on A/R 15x8 wheels. I'll try to dig up a pic! Share this post Link to post Share on other sites
hodge 6 #10 Posted April 23, 2009 Yea, most modern Jeeps run 5 on 4 1/2's. Share this post Link to post Share on other sites
Lane Ranger 10,968 #11 Posted April 23, 2009 My dad's old wheel horse 1054 has 15 inch -five lug car wheels with snow tires (I think they are Ford) on a 1054. The four lug 1054 hubs have a modification of a new hole drilled to accept a third lug. Only three lug bolts hold this wheel and tire on - and he has been using this tractor for 25 years! Note the rear fenders have been cropped to accomodate the bigger wheels and tires. Here is a Decem ber 2008 photo: http://i728.photobucket.com/albums/ww284/L.../100_1645-1.jpg Here is photo after a recent repaint job: http://i728.photobucket.com/albums/ww284/L...nger104/018.jpg And here is one of the 15 inch wheel and three lugs on the 1054: http://i728.photobucket.com/albums/ww284/L...nger104/020.jpg Share this post Link to post Share on other sites
