What am I missing (snow blade install)

[Bean701 35]

I got a dozer blade with my 312-A.  I think I’m missing some pieces.  Any ideas?  

[gwest_ca-(File Mod) 11,033]

Look at the illustrated parts list (TIPL). It shows all the parts. This is not necessarily the blade model you have but the parts should be the same. This one was sold when your tractor was new.

Garry

[oliver2-44 9,696]

There should be a few attachment bracket that bolts under your rear axle. It may be on the tractor if they came together. Looks like your also missing the handle that move the pin to angle blade side to side

[Bean701 35]

1 hour ago, oliver2-44 said:

There should be a few attachment bracket that bolts under your rear axle. It may be on the tractor if they came together. Looks like your also missing the handle that move the pin to angle blade side to side

This is all I see.  I’m missing handle and linkage it looks like to turn blade.  Not sure what else.

[Burnerman 758]

Kinda looks like you have the rear tach a matic on the axle although it’s different then mine. You’re missing the plow angle lever and linkage maybe. Hard to see in your plow photo. 

[SylvanLakeWH 25,493]

11 hours ago, Bean701 said:

This is all I see.  I’m missing handle and linkage it looks like to turn blade.  Not sure what else.

 

That is the same rear axle blade attachment I have. It looks complete. Here is pic of mine to compare:

 

Looks to me like you need the blade adjustment handle and the rod connecting that to the blade.