Will it fit?

[Sarthurs01 822]

I found a plow for a decent price and wondering if it will fit a c81? Thanks

[Guest 88vic]

Yes that plow should fit.  Not sure what price youre paying, but a decent one can be had for $150-200. Sometimes cheaper !    Gotta keep your eyes peeled, they pop up every now and again.  Dont forget to get the rear quick attachment bracket with it too if you dont already have one. 

[Guest 88vic]

Looks like your angle handle is missing but thats no biggie. Can always get one or even fab one up. 

[Sarthurs01 822]

7 hours ago, WHEELHORSEFAN*16 said:

Yes that plow should fit.  Not sure what price youre paying, but a decent one can be had for $150-200. Sometimes cheaper !    Gotta keep your eyes peeled, they pop up every now and again.  Dont forget to get the rear quick attachment bracket with it too if you dont already have one. 

Thanks it’s a hr and 1/2 away for $60 think I might just make the drive.

[gwest_ca-(File Mod) 11,033]

Click on the picture

Garry

[peter lena 8,583]

agree with wheelhorsefan , on the fitment of that plow, in addition to over all shape , check out wear bar area , at lower plow to ground point, as long as it has not worn into the actual plow blade lower edge ,  past the wear bar zone , you can always replace the bar, with new stock. another thing i would do on a used buy is to wet sand it down or just soak it down with penetrating oil. the oil will instantly stop the rust and retain the paint  / patina . did that on a recent  plow pick up. also went over a vitrifaction of movement sitting plow on milk crates , lubricating and washer enhancing all movement points . jmoo , pete 

[Sarthurs01 822]

Made the trip and well worth it. Picked it up for $50 and found out he has another horse at a camp about 10 mins from my house!