Stepney 2,325 #1 Posted September 19, 2019 Hello, all. Working on redoing a 42"SD from a 1985 312-8. Like most all WH decks, it has the sliding bar for the spindle belt tension that rides on a pair of plastic washers. Somehow, the tension bar has grown legs.. really need to get this one going for leaf season. I know my 48" deck bar is too big. But does anyone know if a 36RD piece would fit? . I know where I can grab a cheap parts deck, but it's a bit of a ride if it's not going to work. It looks to be 80s era by the tags, but it has no readable numbers. Share this post Link to post Share on other sites
lynnmor 7,302 #2 Posted September 19, 2019 Those bars wear pretty fast, so I would just pay up and buy new with new washers. Share this post Link to post Share on other sites
cleat 5,812 #3 Posted September 20, 2019 42 and 48 use the same bar 106120. Cleat 1 Share this post Link to post Share on other sites
daveoman1966 3,745 #4 Posted September 20, 2019 Here is the cheapest Toro / wheelhorse supplier I've found.... and a shopping list for you too... https://www.psep1.biz/arinet.asp?aribrand=TO# 1 Share this post Link to post Share on other sites
Lee1977 6,647 #5 Posted September 20, 2019 9 hours ago, cleat said: 42 and 48 use the same bar 106120. Cleat The deck tension bars for the 42 and 48 have two treated holes for the idler. Share this post Link to post Share on other sites
