Pullstart 62,734 #601 Posted May 2, 2020 If you were to open the axle for lead shot... depending on the size you could toss it in a camp fire after the coffee’s done and melt it all in far from harm. 2 Share this post Link to post Share on other sites
19richie66 17,497 #602 Posted May 2, 2020 1 hour ago, ebinmaine said: Colossal. 1-7/16". Same size crank as Lil’ Red’s crank and the M20 that’s in the wife’s 2054. 3 Share this post Link to post Share on other sites
Stormin 9,981 #603 Posted May 3, 2020 Where's the weekend progress report? Be my bedtime soon. 6 Share this post Link to post Share on other sites
Pullstart 62,734 #604 Posted May 3, 2020 23 minutes ago, Stormin said: Where's the weekend progress report? Be my bedtime soon. Nothing Colossus, but here’s my progress Norm... I got 9 holes of walking and chasing my balls in today, a 1054 found it’s way to my drive and I bought a C100 from @ebinmaine, not really knowing how it’ll get to Michigan yet! It’s only 933 miles each way, I should’ve negotiated a delivery included! 1 5 Share this post Link to post Share on other sites
ebinmaine 67,185 #605 Posted May 3, 2020 34 minutes ago, Stormin said: Where's the weekend progress report? Be my bedtime soon. I tried the above pulley on the engine crankshaft to be sure it is the right size. Not much more to offer... 2 2 Share this post Link to post Share on other sites
Cvans 1,009 #606 Posted May 3, 2020 2 hours ago, ebinmaine said: Not much more to offer... Did you wear your new hat for that task? 4 Share this post Link to post Share on other sites
tom2p 2,394 #607 Posted May 4, 2020 2 hours ago, Cvans said: Did you wear your new hat for that task? rumor has it he will star in a movie wearing that hat move over Indiana Jones ! 4 1 Share this post Link to post Share on other sites
tom2p 2,394 #608 Posted May 4, 2020 5 hours ago, pullstart said: Nothing Colossus, but here’s my progress Norm... I got 9 holes of walking and chasing my balls in today, a 1054 found it’s way to my drive and I bought a C100 from @ebinmaine, not really knowing how it’ll get to Michigan yet! It’s only 933 miles each way, I should’ve negotiated a delivery included! could be a job for the RedSquare bucket brigade delivery service 6 Share this post Link to post Share on other sites
ebinmaine 67,185 #609 Posted May 7, 2020 I got the axle stubs trimmed down to length and The Paint Department did a bit of spraying. 7 1 Share this post Link to post Share on other sites
ebinmaine 67,185 #610 Posted May 9, 2020 Trina got the front axle bracket and the axle painted up. We installed the frame and its rear supports onto the adapter this morning. Also bolted the front bracket on with axle in place to verify position after I had welded in braces on both the frame and front support. Lines up nicely. I'll use the piece of 3/4 rod in the photo to make up an extended length axle pivot pin. Look looooong?? The wheel base is 9" longer than a standard C series. Adding the extra size of the tire diameter this machine will be 16" longer than stock. 7 13 Share this post Link to post Share on other sites
tom2p 2,394 #611 Posted May 9, 2020 lookin good ! 1 Share this post Link to post Share on other sites
Pullstart 62,734 #612 Posted May 9, 2020 I’m sure I could find the answers... but for the sake of conversation... 1) What is your source of front axle stubs? 2) Is your hub pattern the same as the rear GT bolt pattern? 3) imagine 6-12’s on the front of some beast machine with 26x12-12’s out back! 2 Share this post Link to post Share on other sites
ebinmaine 67,185 #613 Posted May 9, 2020 4 minutes ago, pullstart said: What is your source of front axle stubs? Etrailer.com Several different grades of quality available on most of their items. Customer service is excellent. I'd recommend them. 4 minutes ago, pullstart said: Is your hub pattern the same as the rear GT bolt pattern Sure is. 5 x 4.5 5 minutes ago, pullstart said: imagine 6-12’s on the front of some beast machine with 26x12-12’s out back! This will have 6-12 AGs on trailer wheels front. 7.60-15 AGs on (camper/trailer?) wheels rear. Should be a good combo. 2 4 Share this post Link to post Share on other sites
Pullstart 62,734 #614 Posted May 9, 2020 Just now, ebinmaine said: Etrailer.com Several different grades of quality available on most of their items. Customer service is excellent. I'd recommend them. Sure is. 5 x 4.5 This will have 6-12 AGs on trailer wheels front. 7.60-15 AGs on (camper/trailer?) wheels rear. Should be a good combo. don’t tell anyone I said this... that’s a genius tire idea! 2 4 Share this post Link to post Share on other sites
Stormin 9,981 #615 Posted May 9, 2020 That colour scheme is the dogs whatsit's. Lovely job Trina. 2 1 Share this post Link to post Share on other sites
Tractorhead 9,064 #616 Posted May 9, 2020 Lookin good, curious of the result at all. colorscheme looks interesting. 1 1 Share this post Link to post Share on other sites
Stormin 9,981 #617 Posted May 11, 2020 (edited) BTW Eric, it's Monday. Where's the weekend progress report. TRINA! Give him a Edited May 11, 2020 by Stormin 1 1 4 Share this post Link to post Share on other sites
ebinmaine 67,185 #618 Posted May 11, 2020 3 hours ago, Stormin said: Where's the weekend progress report Well.... The only real change is that I got some roller bearings for the front spindles. steering should be easier. 5 2 1 Share this post Link to post Share on other sites
Cvans 1,009 #619 Posted May 12, 2020 Your going to have that thing rolling so easily that it's going to squirt out from under you. 1 5 Share this post Link to post Share on other sites
RandyLittrell 3,877 #620 Posted May 16, 2020 Lookin real good Eric!!! Can't wait to see this done! Randy 1 Share this post Link to post Share on other sites
Tractorhead 9,064 #621 Posted May 16, 2020 We wait for the Final Status Eric. 🤤 👍 Single progresses are pretty good... .... but it takes long for continued growth between single Steps... huh 😂😂😂😂 3 Share this post Link to post Share on other sites
ebinmaine 67,185 #622 Posted May 16, 2020 3 hours ago, Tractorhead said: We wait for the Final Status Eric. 🤤 👍 Single progresses are pretty good... .... but it takes long for continued growth between single Steps Oh man I know.... I wish I had more time to work on it. We'll get there. 4 1 Share this post Link to post Share on other sites
Tractorhead 9,064 #623 Posted May 16, 2020 Maybe you start to collect more pics of the Work steps so you can post every Day one of the Pic’s and nobody have to wait 😂😂 ... to be continued 1 Share this post Link to post Share on other sites
ebinmaine 67,185 #624 Posted May 16, 2020 (edited) 32 minutes ago, Tractorhead said: Maybe you start to collect more pics of the Work steps so you can post every Day one of the Pic’s and nobody have to wait 😂😂 ... to be continued Good idea.. Edited May 16, 2020 by ebinmaine Share this post Link to post Share on other sites
RandyLittrell 3,877 #625 Posted May 17, 2020 On 5/11/2020 at 6:53 PM, ebinmaine said: Well.... The only real change is that I got some roller bearings for the front spindles. steering should be easier. Wherd did you get your bearings Eric? I need to do that kid on my loader tractor. Randy 1 Share this post Link to post Share on other sites
