Mickwhitt 5,016 #1 Posted August 22, 2019 Hi all, I have a parts manual for the C-125 and a kohler engine workshop manual. But is there a workshop manual for the C-125? Something that will help with a full rebuild. I've searched the manuals list but I'm not sure I know what I'm looking for. Best regards Mick 1 Share this post Link to post Share on other sites
ebinmaine 70,733 #2 Posted August 22, 2019 (edited) Mick I use a cell phone for 99% of my internet so my searching can be a little challenging. There are a several folks on the site that helped me out on a regular basis. @gwest_ca Garry is our files guru. Edited August 22, 2019 by ebinmaine 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,243 #3 Posted August 22, 2019 Wheel Horse never published a service manual that is tractor specific. Instead they have transmission service manuals and electrical manuals. Many parts lists has service notes throughout the illustrations. Post your model number and serial number and will look for what we have. Sometimes a service bulletin helps. There is a 1978-79 manual that covers many years as the product did not change much. Click on the picture Garry 1 1 Share this post Link to post Share on other sites
The Tuul Crib 7,338 #4 Posted August 22, 2019 7 minutes ago, gwest_ca said: Wheel Horse never published a service manual that is tractor specific. Instead they have transmission service manuals and electrical manuals. Many parts lists has service notes throughout the illustrations. Post your model number and serial number and will look for what we have. Sometimes a service bulletin helps. There is a 1978-79 manual that covers many years as the product did not change much. Click on the picture Garry Share this post Link to post Share on other sites
Mickwhitt 5,016 #5 Posted August 22, 2019 Hi. I only have the engine plate details so far. I assume there is a chassis plate with model details on it. I will hunt it out tomorrow. Engine plate details Spec no. 47723d Model no. K301AS Serial no. 9924607 Share this post Link to post Share on other sites
Stormin 9,983 #6 Posted August 22, 2019 Mick. There should be a plate down under the steering wheel, in front of the gear levers. Is the tractor still in one piece? There are posts on all aspects of a rebuild on here. Just ask what you need to know and someone will put you right. Share this post Link to post Share on other sites
Mickwhitt 5,016 #7 Posted August 22, 2019 I stripped the tractor down 5 years ago and rebuilt the chassis and gearbox. Then my wife decided we needed to move house and my workshop went on the back burner. Now I have time to devote to rebuilding her I'm unpacking the parts and getting on with the engine. If I can get the engine running the rest will be a walk in the park lol Mick 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,243 #8 Posted August 23, 2019 Your engine was made in 1979 so it should have landed on a 1980 C-125 - the first year for the them. Model number 01-12K801 if it has a gear transmission. https://www.wheelhorseforum.com/search/?&q="01-12k801"&type=downloads_file&search_and_or=or&sortby=relevancy Garry Share this post Link to post Share on other sites
Mickwhitt 5,016 #9 Posted August 24, 2019 Garry, That's a fantastic set of resources for me to look through. Thank you. I'm sure I will be able to rebuild the engine with help from the forum. As soon as I get things together I will start posting some pictures. Again many thanks, Mick 2 Share this post Link to post Share on other sites
RandyLittrell 3,894 #10 Posted August 24, 2019 Kohler still has there manuals online. Here is a link for both service and user manuals. https://kohlerpower.com/en/engines/manuals Lots a smart fellers on here that are happy to help! Just ask away! Randy Share this post Link to post Share on other sites
