troutbum70 857 #1 Posted August 20, 2019 Need to replace output shaft seal on the 417-8 the wheel horse part number is 100442 I believe. Any one happen to know the cross reference number for napa? Should be 5/8 inch ID. Share this post Link to post Share on other sites
ebinmaine 68,370 #2 Posted August 20, 2019 @squonk. ? Share this post Link to post Share on other sites
ebinmaine 68,370 #3 Posted August 20, 2019 I can't do it very well on this phone but if you look at the top of the transmission section I think there's a Seal Cross Reference somewhere? Share this post Link to post Share on other sites
squonk 41,344 #4 Posted August 20, 2019 Napa #6105. Not stocked at many distribution centers. Richmond VA. shows 1 Share this post Link to post Share on other sites
troutbum70 857 #5 Posted August 20, 2019 I will check napa this mourning Squonk tnx, Ebinmaine I don't see the cross reference chart. I see some of you fellas show as supporters so maybe you have access to info we others don't. What is a supporter and how do you reach that level? Share this post Link to post Share on other sites
pfrederi 17,881 #6 Posted August 20, 2019 (edited) It is an input shaft seal not an output.... Just look at the pinned topic at the top of the transmission transaxle forum. Any one can view it. Also consider paying to become a supporter https://www.wheelhorseforum.com/store/ Edited August 20, 2019 by pfrederi Share this post Link to post Share on other sites
stevasaurus 22,866 #7 Posted August 20, 2019 Also...SKF 6105 Share this post Link to post Share on other sites
ebinmaine 68,370 #8 Posted August 20, 2019 If you can't find it locally you could always order it from our own Lowell... Share this post Link to post Share on other sites
troutbum70 857 #9 Posted August 21, 2019 Okay tnx guys have two coming from Napa, been busy with my 92 year old dad not doing so well at this time. And I will take part in being a supporter when I get a chance to put money on my all but exhausted debit card. Did not know it was that simple, stupid old retired truck driver ya know. 1 1 Share this post Link to post Share on other sites
ebinmaine 68,370 #10 Posted August 21, 2019 Can't be all that stupid. You have a Wheelhorse. --- another trucker Share this post Link to post Share on other sites
The Tuul Crib 7,337 #11 Posted August 21, 2019 Amazon l found to be cheaper and quicker. Or even Zoro. Share this post Link to post Share on other sites
troutbum70 857 #12 Posted August 21, 2019 I figure if you own a couple wheel horses and maybe a Farmall or two then GOD has been pretty good to you hi hi. Should have seals in couple of days, I need to remember a wheel horse guy named Lowell when needing parts. 1 Share this post Link to post Share on other sites
ebinmaine 68,370 #13 Posted August 21, 2019 6 minutes ago, troutbum63 said: remember... Lowell Yeah. You sure do. Good people. Him and his family. They do a lot for these tractors. 1 Share this post Link to post Share on other sites
troutbum70 857 #14 Posted August 21, 2019 I try to do much business with my local business folks as I can, but since I don't have the old cornbinder anymore I don't buy the amount of parts that I once did. But I will sure keep Lowell in mind. Share this post Link to post Share on other sites
ebinmaine 68,370 #15 Posted August 21, 2019 1 hour ago, troutbum63 said: I try to do much business with my local business folks as I can, but since I don't have the old cornbinder anymore I don't buy the amount of parts that I once did. But I will sure keep Lowell in mind. Yepp. We do the same here. I do have one great small engine place not too far outta the way. I also buy from a-z and Lowell occasionally. They're Both a few hundred miles from us but "local" in my Redsquare community. Share this post Link to post Share on other sites
troutbum70 857 #16 Posted August 21, 2019 In comparison to the universe as a whole we're all In the same neighborhood. 1 Share this post Link to post Share on other sites
