Jump to content
RJ Hamner

Stumped AGAIN Only Different Tractor

By RJ Hamner, in Transmissions and transaxles

Recommended Posts

RJ Hamner    1,007

RJ Hamner
Posted

Had just cleaned out the fuel system and thought I'd run it around the block but with the clutch depressed and slack in the belt the transmission pulley still is turning too fast to allow it to go into gear.

 

Here is the picture of the setup. Am I missing a part or have I miss installed something?

IMG_20190808_165937.jpg

  • Like 1

Share this post

Link to post
Share on other sites
 

857 horse    2,581

857 horse
Posted

HAMMER,,,,,,,,,,,,,,,,,,,,WHERE IS THE BELT Guard......???   it plays a role in making shifting possible,,,,

 

Share this post

Link to post
Share on other sites
 

RJ Hamner    1,007

RJ Hamner
Posted

So with the guard on its going act different? Because I had the same problem with the guard on. 

Share this post

Link to post
Share on other sites
 

formariz    11,987

formariz
Posted (edited)

The rod that is now under the belt should be above belt, barely touching it. That placed correctly along with belt cover will make it work assuming you have the correct belt. Belt needs to stop completely to change gears.

Edited by formariz
  • Like 2

Share this post

Link to post
Share on other sites
 

Digger 66    3,481

Digger 66
Posted

Yep ^^^

Share this post

Link to post
Share on other sites
 

RJ Hamner    1,007

RJ Hamner
Posted

Thanks

Bob

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • mhlmeader
      Suburban 400 restoration
      By mhlmeader
      Hi folks, picked this up this evening.   Never done a tare down restoration, so this looked like a good one to do it on.  Engine fired on some starting fluid when I got it home, so that's a positive sign.  Prolly was a forum member I got it from, it's a small world after all.  Told the fiancee it would be hers, dont know why, but that's what I told her anyway...anywho just sharing.  
       



    • Tyler9014
      Craigslist find! Suburban 400 in Green Bay Wisconsin
      By Tyler9014
      I just picked up this 1960 Suburban 400 off of Craigslist. My trucks starter decided to take the day off and I got stranded a hour away from home in Green Bay Wisconsin in the shadow of Lambeau field with my daughter but we got some help from family and got home with our prize. Now I have the transmission torn down and need a spider gear and a shift lever collar. Does any one know if the axle has too much wear to re-use? Any help would be very appreciated. The break lever gear on the shaft seems to have a little more wear on a couple spots than I would have liked to see but I think it is ok overall. (can't seem to get a good picture)






×
×
  • Create New...