Spring missing!

[KC9KAS 4,741]

My 875 is missing the small spring that is attached to the cam/neutral plate. 

The part number is 1230 and NLA.

Anyone have one or know the dimensions of the spring?

Thank you!

[stevasaurus 22,713]

If no one chimes in here, I can dig out my 876 tomorrow and see if I can figure that out for you.  I do have to dig it out to look. 

[SPINJIM 1,981]

I'm missing the same spring for my 'no name' 16 automatic, so I'll be interested in any info.

   Jim

[daveoman1966 3,747]

This is spring # 1230.   Take the measurements to a hardware store and match it.

 

[pfrederi 17,697]

 

I am using these from McMaster

 

Edit:: getting that spring mounte is a challenge....

 

 

 

 

Edited August 4, 2019 by pfrederi

[The Tuul Crib 7,336]

I might have one if you cant find it

LMK

[pfrederi 17,697]

PM me your address I will mail you one.

[daveoman1966 3,747]

There is another solution....mount a return spring on the OUTSIDE of the hoodstand...  like this on my C-160 Auto..  Very easy to do, and to change out if / when it breaks.

Edited August 4, 2019 by daveoman1966

[pfrederi 17,697]

2 minutes ago, daveoman1966 said:

There is another solution....mount a return spring on the OUTSIDE of the hoodstand...  like this on my C-150 Auto..  Very easy to do, and to change out if / when it breaks.

 

 

Great idea Dave... getting that little spring hooked up inside requires a lot of very salty language....

[squonk 41,050]

• Did the same thing on my C-160. No salty words needed! 

[SPINJIM 1,981]

Thanks for all of the measurements and advise.  Now I can go through my misc. spring collection to see what might fit.

  Jim

[Pullstart 62,829]

 

Here is a link to the springs I used, from the local ACE Hardware.