zlimmy 78 #1 Posted July 26, 2019 Does anyone know the exact measurement of the rear axle rod or can measure for me? Between roller attaches.. 🙂 Share this post Link to post Share on other sites
857 horse 2,581 #2 Posted July 26, 2019 I DONT HAVE AN ANSWER TO YOUR QUERY....HOWEVER....MANY ARE GOING TO ASK ABOUT ALL THE POWER YOU HAVE RUNNING TO THAT ROCK....CUTTING EDGE TO SAY THE VERY LEAST,,,,I WILL STAY TUNED........ Share this post Link to post Share on other sites
Ed Kennell 38,024 #3 Posted July 26, 2019 (edited) My two 48" decks measure 44.25" inside to inside on the bar the wheel mounts on. I'm not sure what the D means. My decks are on a C-120 and a 417H. Edited July 26, 2019 by Ed Kennell Share this post Link to post Share on other sites
"D"- Man 827 #4 Posted July 26, 2019 I have a deck from an 18 Auto or D-180 and it measured 44.25" end to end. Share this post Link to post Share on other sites
zlimmy 78 #5 Posted July 27, 2019 This deck has no identity plates on. So i don't know other than its for my D-series tractor. 🙂 Thanks alot for measuring. Share this post Link to post Share on other sites
zlimmy 78 #6 Posted July 27, 2019 6 hours ago, 857 horse said: I DONT HAVE AN ANSWER TO YOUR QUERY....HOWEVER....MANY ARE GOING TO ASK ABOUT ALL THE POWER YOU HAVE RUNNING TO THAT ROCK....CUTTING EDGE TO SAY THE VERY LEAST,,,,I WILL STAY TUNED........ 6 hours ago, 857 horse said: 😁😁 Yes, some magic called "not finish yet"😝 It's a mix of fiber cables and power cables. Share this post Link to post Share on other sites
