What are you mowing with?

[AHS 1,440]

I’m proud of this, a 1973 wheel horse 14 hp hydrostatic transmission, with a 42” RD. All I had to do to get this running is install new fuel lines, a fuel pump, battery and a spark plug. It runs sweet!!

[The Tuul Crib 7,336]

This is what l use most of the time . 

414-8.  And this is what l use some of the time My 1067

 

Edited July 24, 2019 by The Tool Crib

[Pullstart 62,799]

Just got done mowing my sister in-law’s place.  She said it was really bad, so I brought “Jane”, my Plain Jane Commando 6 along in case I needed to do any sweeping.  By the way...  I miss having dogs, but I don’t miss all the poop!

 

 

[AHS 1,440]

Nice! A 414-8 is on my list of WH to buy!

[71_Bronco 1,072]

'68 Commando 8 with a '69 5-2362 deck (gear drive, 36" rear discharge)

[The Tuul Crib 7,336]

13 minutes ago, AHS said:

Nice! A 414-8 is on my list of WH to buy!

42" rear discharge. Shes my favorite!

[Tractorhead 9,064]

Hey Kev,

how about a sicklebar frontmower on the Horse, 

so you don‘t spray the Poo, just sickle it... 😂

 

I use just my 212 „Allround Workhorse“ with an attached 36“ mowerdeck and an Sweeper behind.

That does all in one.

 

Edited July 24, 2019 by Tractorhead

[Lee1977 6,647]

My main mowers C-120/180 and 520-H both with 48" side discharge decks.

 

 

The 312-8 was used today it moves right along with the 25" rear tires.

 

I used Forest Gump for clearing small brush and around fields.

 

Then the  1958 22" Eddleman for triming and ditches and banks.

I have 4 1/2 acres and mow a little over 2 acres.  We also have 28 acre farm next door with a acre or so. My brother is taking care of it now. I will get the leafs up around Thanksgiving.

 

 

 

 

Edited July 25, 2019 by Lee1977

[Pullstart 62,799]

Someday Stefan, we don’t want to rush a good thing!

[WHNJ701 4,165]

[Stepney 2,325]

 

Been taking my WH's work back from the old JD slow but sure. I use a WorkHorse GT '14'-48 'Twingle" lately, with the original 48" the tractor came with. Works great for the few properties I manage. 

[rmaynard 15,428]

1996 416-H with 42" SD deck. 

Edited July 24, 2019 by rmaynard

[857 horse 2,581]

WHERE DO YOU GUYS FIND THESE 45 YR OLD     BRAND NEW MACHINES....???

 

THEY NEVER FALL OUT OF THE SKY AT MY HOUSE........!!!!!!!                               

[Digger 66 3,478]

Main squeeze is an Ariens Z/T .

But my Raider fills in when necessary 

I doubt my little Z/T would pull a 600 plus pound garden cart 

 

Please excuse the new slob neighbor 

 

Edited July 24, 2019 by Digger 66

[Stormin 9,981]

 Mow with my '82 C-125 and 42"RD.

 

 

The '79 C-81 fitted with '62 sickle gets some use as well.

 

[Sparky-(Admin) 21,311]

 Glad to see a couple of you using other brands  ....I’m one of those guys as well. So probably 70% is done with my Craftsman with a 46” deck and a triple bagger setup and 30% is done with my WH C-105 with a 42SD. 

  That’s my dad mowing my yard with the C-105 last year when I was laid up with a leg infection.

 

[Pullstart 62,799]

1 hour ago, Stepney said:

 

Been taking my WH's work back from the old JD slow but sure. I use a WorkHorse GT '14'-48 'Twingle" lately, with the original 48" the tractor came with. Works great for the few properties I manage. 

 

 

I’m really good at getting off topic here... sorry ‘bout that!

 

I see the twin scheme and single cylinder, but my ‘67 Puch 250 truly is a twingle!  Two pistons, one combustion chamber 

 

 

 

 

[rmaynard 15,428]

2 hours ago, 857 horse said:

WHERE DO YOU GUYS FIND THESE 45 YR OLD     BRAND NEW MACHINES....???

 

THEY NEVER FALL OUT OF THE SKY AT MY HOUSE........!!!!!!!                               

It wasn't brand new when I got it. But a little elbow grease and proper lighting makes it look pretty good, huh?

[rmaynard 15,428]

1 hour ago, Sparky said:

 Glad to see a couple of you using other brands  ...

Truth be told, when my 10 year old grandson comes over to help dear old Papa with some chores, he uses my JD X-300. 

[adsm08 2,022]

1 hour ago, rmaynard said:

Truth be told, when my 10 year old grandson comes over to help dear old Papa with some chores, he uses my JD X-300. 

 

Next year, around show time, I want to look for a Ranger or Suburban for my boy. I'll mount up one of my 327 decks to it and let him mow.

 

The only reason I don't let him do it already is because his legs are too short to reach the pedals on the 855.

[SylvanLakeWH 25,493]

1982 C 105 and an old Toro...

Edited July 25, 2019 by SylvanLakeWH

[ZXT 2,401]

I generally mow with my K321 powered C120. Next time, though, the deck will be going on my new C160 to see how well it does!

 

@Stepney Is that an Economy I see in the background?

[mhlmeader 689]

Sold my husqvarna,  gonna start using a little bit of this....and little bit of that....

 

[953 nut 55,092]

My 310-8 with 42" RD is the go-to mowing machine in my herd.

[Retired Wrencher 5,442]

I had this Toro 832 profesinal was the best mower I have ever had. The tranny went on it could not find one Soooo. The cub is a new VERY light duty auto. Second year mowing  with it. I am starting to like it.