Does my C-160 have Limited Slip Differential?

[11ccantley 0]

Hello all,

 

I have what i believe to be a Wheel Horse C-160 with a Kholer engine and automatic (hydro) transmission. I have attached a photo of the model tag below (dont mind the pink lol) Ill explain later 

Can anyone help me with identifying if this tractor has posi / limited slip? And if not, what is required to make it limited slip.

[pfrederi 17,885]

No limited slip.  You could round up a 10 pinion differential and use that but you may also have to change the mushroom gear depending what style you have

[stevasaurus 22,868]

Right on Paul...1976 C-160 Auto with 8 pinion trans-axle.  It looks like he would have the 1 piece mushroom gear, so he would need the 2 piece mushroom gear with the 10 pinion trans-axle to do that.    If he wants to.

 

BTW....Welcome to Red Square

[gwest_ca-(File Mod) 11,096]

I think this is a 1977 model 71-16KS02

Click on the fuzzy picture

Garry

[oliver2-44 9,870]

Just remember with a limited slip differential the turning radius increases.

[pfrederi 17,885]

9 hours ago, oliver2-44 said:

Just remember with a limited slip differential the turning radius increases.

I have several 10 pinions and never noticed that they have a greater turning radius.  i put a 10 pinion in a 310-8 and noticed no change in maneuverability....

[11ccantley 0]

Thanks for all the information and welcoming!  

 

Can anyone advise if my Raider 10  8-speed (what i think is model 1-0360) trans will be a direct swap from my Sundstrand auto? And if so does this have Limited Slip??

 

Thanks in advance!  

 

 

 

 

[pfrederi 17,885]

Direct transmission swap no...  Would need modification to linkages etc.  To see if your Raider has functioning Limited slip jack up rear end with it in neutral spin one rear wheel the other should go the same direction   if it goes opposite it is not limited slip. (Or the limited slip spring is broken)