WHX?? 49,143 #1 Posted July 2, 2019 https://www.heywheel.com/index.html 2 Share this post Link to post Share on other sites
JAinVA 4,620 #2 Posted July 2, 2019 (edited) Nice site.I looked through their products and the 12" rim blanks are fairly priced. I think I will stick to Miller Tire,thoughThat is where I got the demountable 8" rims for my loader tractor.They have 12" rim blanks and fully described centers for them as well.The last rims I got for the Ford 3400 loader came from Steiner tractor.Decent price and they had used center flanges as well choose files...---------Click to choose files.url Edited July 2, 2019 by JAinVA Share this post Link to post Share on other sites
RandyLittrell 3,885 #3 Posted July 3, 2019 On 7/2/2019 at 3:50 PM, JAinVA said: Nice site.I looked through their products and the 12" rim blanks are fairly priced. I think I will stick to Miller Tire,thoughThat is where I got the demountable 8" rims for my loader tractor.They have 12" rim blanks and fully described centers for them as well.The last rims I got for the Ford 3400 loader came from Steiner tractor.Decent price and they had used center flanges as well choose files...---------Click to choose files.url 89 B · 2 downloads What do you mean "fully described centers" I talked to Bryan Hey and am getting some 10.50x12 rims in the next week or two. He says he can weld the centers in at whatever backspacing I want. This company is an hour from my house, so I am gonna pick them up. Maybe he can give me some more info that might be helpful to us. Randy Share this post Link to post Share on other sites
JAinVA 4,620 #4 Posted July 3, 2019 (edited) I find To Order a little vague.I want to know what is available.I have no issue with this company, but have had good luck with Miller Tire.I looked and heywheel didn't seem to offer a demountable 8" rim which again is what I needed and Miller had them.Just trying to give the folks here another option for wheels,nothing else. Edited July 7, 2019 by JAinVA 1 Share this post Link to post Share on other sites
RandyLittrell 3,885 #5 Posted July 12, 2019 Picked up my wheels today and am very happy with them. These guys have been in business since 1935 and I would bet some of the equipment is that old. Super nice guys. I emailed them about what I wanted and they welded them up to my specs without even asking for money first. I will be doing business with them again and I will post some pics of my wheels tomorrow. Randy 1 Share this post Link to post Share on other sites
RandyLittrell 3,885 #6 Posted July 18, 2019 (edited) Ok, tomorrow didn't happen! But I finally got tires mounted and put on my puller. The tires are Antego 26x12-12 but there are not 12" wide. I put these on 10.50 wheels and they are pooched out a bit. But they will work fine on this stock puller. Here is a few pics, they put a primer on them but I will strip it off before I paint, it isn't adhered too well. I got the first tire mounted with my harbor freight mini tire changer, but couldn't get it seated. My back was killing me by then, so I loaded them up and took them to the tire shop! I know when to quit! Randy Edited July 18, 2019 by RandyLittrell 2 1 Share this post Link to post Share on other sites
857 horse 2,581 #7 Posted September 25, 2019 IF CLEARENCE WILL BE AN ISSUE,,,,,,LOOK ON EBAY -----WHEEL SPACERS.......1 OR 2 INCH THICK SHOULD DO IT......$40 OR $50 FOR A PAIR,,,, 4 1/2 DIAMETER BOLT PATTERN.... Share this post Link to post Share on other sites
RandyLittrell 3,885 #8 Posted September 26, 2019 15 hours ago, 857 horse said: IF CLEARENCE WILL BE AN ISSUE,,,,,,LOOK ON EBAY -----WHEEL SPACERS.......1 OR 2 INCH THICK SHOULD DO IT......$40 OR $50 FOR A PAIR,,,, 4 1/2 DIAMETER BOLT PATTERN.... I run them this close on purpose, but your post made me look at my pic again. One is way closer than the other. I put them on and rolled it back in the shed to work on this winter. I had them.made to my specs and looks like I need to pull them off and get the tape out!! Thanks. Randy 1 Share this post Link to post Share on other sites
