Mower deck too close to rear tires

[Paul Boy 31]

Got my new idler pulley back on and machine running again. However, the back of the rear discharge deck is way too close to the rear tires. I didn't change anything just reinstalled the 36" deck back onto the C 111. What am I doing or not doing right. It mows alright when deck is lowered but when I raise the deck it hits the rear wheels. Is there an adjustment I should have made> Just cannot figure out what I did. Would appreciate some advice.

 

[dcrage 627]

See Dave O’s response in your other topic on the idler/bearing. 

[Paul Boy 31]

36 minutes ago, Paul Boy said:

Got my new idler pulley back on and machine running again. However, the back of the rear discharge deck is way too close to the rear tires. I didn't change anything just reinstalled the 36" deck back onto the C 111. What am I doing or not doing right. It mows alright when deck is lowered but when I raise the deck it hits the rear wheels. Is there an adjustment I should have made> Just cannot figure out what I did. Would appreciate some advice.

 

Thank you all I finally see what I needed to do. Running perfect!!