Jump to content

 
Countdown To Christmas!
 

 
DarrellF

D200 trans axle rebuild is coming.

By DarrellF, in Transmissions and transaxles

Recommended Posts

DarrellF    33

DarrellF
Posted (edited)

Guess since I broke the hub and found that bad axle keyway I’m going to pull the rear and rebuild it

might as well, cause I need to replace the axle. This way I get a good look inside and inspect everything.

Also change the bull gear bolts to mark 8, seals, bearings, whatever it needs.

1: looks like I’ll need to make a new gasket

2: Axle seals

3: Bull gear bolts and nuts 5/16 mark 8 

4: O-rings 

5: and Anything else as I inspect

6: Not sure what torque specs are but I'm sure someone will know.

This way she will be tip top and painted.

I will post pics as I go not sure when I’ll start but I need her fixed.

 

 

 

 

Edited by DarrellF

Share this post

Link to post
Share on other sites
 

DarrellF    33

DarrellF
Posted

Well I got a hub from Marv and here I set waiting for something to move me so far it's not been my summer

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing
  • Similar Content
     
     
    • BuffaloD200
      D series Belt Replacement
      By BuffaloD200
      Hey all, I need to install a drive belt on my 75 D180 for my snowblower.  I've looked through a bunch of D-series owner's manuals, and none seem to mention replacement procedure.  The PTO pulley is fixed, save for engaging the PTO and there is minimal movement at the snowthrower pulley. There's no idler or tensioner as far as I can tell.  Do I have to remove the PTO pulley?  That seems to be a required service item.
      Same question for my 80 D200 as well really.  
       
      Using the recommended 4L490W belt.
       
      Thanks 
    • BuffaloD200
      Problem refilling transmission
      By BuffaloD200
      Hey all, I'm doing my first fluid change on my new-to-me D200.  Refilling the transmission is proving to be quite the struggle.  I've attempted to fill the tranny through the dipstick with a variety of funnels, but the oil just spills over the top.  I may have managed to get a quart in.
      What am I missing?
    • cbj75
      D200 Package for Sale
      By cbj75
      I have a 1975 D200 Wheel Horse with front mount dozer blade, package includes Wheel Horse Dump Trailer, 48" belly mower side discharge, Wheel Horse front and rear wheel weights, turning brakes, rear PTO and 3-point to 2" receiver attachment, and Brinley twin disc harrow. Rear luggage/rack carrier, All refurbished, sandblasted and painted Ford red in 2016. Lots of extra Wheel Horse parts included.
       
      Package price $3000.00.
       
      Bryce Johnson
      102 Anglers PT
      Mc Cormick SC 29835
      913-638-6788

      IMG_1962.HEIC IMG_1965.HEIC IMG_0279.HEIC


       
    • Crazy Old Red Horse
      1975 D180
      By Crazy Old Red Horse
      Barn find 1975 D180. 608 original hours. Tractor and 48” belly mower look to be still in their original paint. Rear 60” finish mower looks like it has had one coat of new paint added at some point. Open to trades. Please email me with any questions or for additional photos. 35 miles north of Pittsbugh.


    • wh315-8
      Yard Work
      By wh315-8
      Grandpa wouldn't line up in right way.  Stubborn. Nice day today, got some of my herd out. 315-8 w/42" deck to mow. D200 to disc w/tandem disc. 520H w/36" tiller. And RJ59 with 36" Parker Sweeper. These horses done me well today.


    		 
×
  • Create New...