RM-327 triple pulley bearing

[adsm08 2,022]

So while mowing today, and having a host of other issues, I looked down to see the triple belt pulley that attaches to the two spindle belts, and the crank shaft belt, was wobbly. Hoping the bolt had just backed out a bit I drove back to the garage to check it, and of course I found the bearings were gone.

 

Anyone know some part numbers?

 

@953 nut @squonk @Bueller ? Anyone?

 

 

 

 

[adsm08 2,022]

While cleaning I found a part number on the face, hard to read, looks like nice 3015 dc.

 

Next question, should there be 1 or 2 of these? I can't find a parts diagram for the deck.

[stevasaurus 22,711]

Here is the manual...the bearing looks like #53 part # 6593 and there are 2 of them with a spacer in-between.  If TORO does not have them, measure the height, ID and OD of the bearing and go to motion industries web site.    Also, if the NICE # is correct, you can search that number on the site also.

 

 

[pfrederi 17,672]

Steve types faster The spacer is essential and note the special bolt.  The #6593 can be replaced by a 1615-2RS bearing (You need 2).  7/16" x 1-1/8 x3/8"

[squonk 41,037]

1615-2rs  7/16"X 1 1/8" X 3/8"  $7.40 Ea from Bearings Direct

 

https://bearingsdirect.com/search?controller=search&orderby=position&orderway=desc&search_query=1615-2rs&submit_search=

[adsm08 2,022]

Thanks guys. Now that i have a minute to look around i see that Lowell has them too (big surprise).

 

Still hoping to find a pair local so i can get back at it.

[adsm08 2,022]

1 hour ago, squonk said:

1615-2rs  7/16"X 1 1/8" X 3/8"  $7.40 Ea from Bearings Direct

 

https://bearingsdirect.com/search?controller=search&orderby=position&orderway=desc&search_query=1615-2rs&submit_search=

 

Amazon also had them, with Prime shipping, for a similar price. 

 

Normally I'd have ordered from WHPM, because I love to support a small business, but I'm in a bit of a hurry this time.