Ken50 1 #1 Posted June 6, 2019 I am restoring 60' 400 suburban. Having trouble locating original tire size for rear ( 22 x 6 - 12 agricultural tread ) Tractor was complete and all original except for a few nails where there should have been cutter pins. Done complete tear down , sand blasted epoxy primer and painted. Rebuild on transmission and engine. Cleaned and reused original bolts and nuts. I am down to the finish line and want to get the tires as close as possible to get the correct look. The closest I have found is 23 x 8.5 - 12. To wide to look right and would rub fender. Any help is appreciated. Share this post Link to post Share on other sites
ebinmaine 68,875 #2 Posted June 6, 2019 This is what we used on Trina's 657. 1 Share this post Link to post Share on other sites
953 nut 56,165 #3 Posted June 6, 2019 Check these out from Miller Tire. https://www.millertire.com/categories/lawn-garden-tires/6-12/ 2 Share this post Link to post Share on other sites
oliver2-44 9,929 #4 Posted June 6, 2019 We would enjoy some pictures of your project! I have one original tire off a suburban, and the Carslie 6x12 Tru-Power are very close for an Ag Tread 1 Share this post Link to post Share on other sites
The Tuul Crib 7,338 #5 Posted June 6, 2019 I put 8.50 deestone on my 12-6 rims and not alot of bulge! 1 Share this post Link to post Share on other sites
