Identify 3 Old Engines and 2 Outboards at Old Repair Shop

[oliver2-44 9,684]

So I stopped by an old Welding & Machine & VW Repair shop while I was down at the farm to get a part welded for my old Oliver loader.

  He said he'd knock it out, so I took a walk around, lots of old junk to look at. 

Spotted these 3 old engines and 2 old Outboards, can you help identify them.

Are any of them worth trying to pick up for parts?

Old Motor 1, Electric Start

 

Old Briggs Motor

 

Old Motor 3

 

Old Boat Motor, Maybe a 2 cyl Champion or Firestone

 

Old Boat Motor 2 ?

 

 

[diesel cowboy 263]

Can't help on the boat motors but engine one is a Tecumseh probably in the 5 or 6 horse range and I'm pretty sure the third one is a Clinton going from the tank and mounting brackets and the dipstick cap.  In the last picture of it there appears to be the model and spec #s stamped in the shroud that wraps around the cylinder going vertically

[stevebo-(Moderator) 8,330]

The one looks like a clinton 1290. The outboards are not worth anything... 

[ebinmaine 67,274]

5 hours ago, stevebo said:

The outboards 

^^^^^^^^^^^^^

 

That's the man that would know right there....

Neat collection, has he.

 

[oliver2-44 9,684]

@clintonnut @stevebo Does that Clinton look like it would be worth picking up? it's attached to an old roto rooter machine.  I'll try to get a better look/picture of the spec plate and the output shaft arrangement next time i am down at the farm. 

[buckrancher 2,679]

the Clinton motor's model number is in the pic on the right I can not read it but the first set of numbers should be the model # the motor

looks like a 498 or 494

[ZXT 2,401]

Looks like an electric start Tecumseh, about a 2.5HP briggs, and I'd guess the third is a Clinton based off of the carb. 

 

First outboard is a Firestone and the second is a Scott Atwater - the first was also made by Scott Atwater but rebranded. Not worth much, but they're good wall hangers if painted up nice.

 

I see a VW flat 4 cylinder and head lying down there with the outboards as well.

Edited June 7, 2019 by ZXT