Jump to content
Bob Nakon

I'm trying to tune up my mower deck

Recommended Posts

Bob Nakon

Hello Gents,

I am trying to figure out my mower deck. it's a 42"SD bought with the tractor in 1977.
I looked at the manual and discovered I have been hooking it up wrong for years. There is a leveler rod and a trunnion which connect to a bracket attached from the rear wheel axle and the furthest back hole on the leveler bar. This is a part I have never used and don't have. As I read more of the manual I see two or three more adjustments that I never touched. It seems that there are adjustments on the tractor linkage as well. The lift rod has always been a mystery to me. It always need to be adjusted. I posted a picture of the part I've never used circled in red.

Thanks for listening to me rant.

Bob

Deck.jpg

Share this post


Link to post
Share on other sites
 
 
Bob Nakon

Thanks Hillbilly, I'll contact them tomorrow.

  • Like 1

Share this post


Link to post
Share on other sites
 
daveoman1966

I just pulled up the Parts Tree schematic.  #17 18 19 will hit for about $40 bux + ship.  I'll send you a good used identical part for $22.  From a 42" deck and in good cond.  Use My Paypal...

42SD 1 (1)a.jpg

Edited by daveoman1966
  • Like 1

Share this post


Link to post
Share on other sites
 
Bob Nakon

Dave,

 Have you got a good lift rod and trunnion too? They look the same but you would know. If you do have one I'll take the two. My wife (the Paypal person in our house) is asleep so I'll have her do the transfer in the morning + $1.40 I owe you. Send me the instructions again so I don't screw this one up. Lets switch to my regular email: effjay40@charter.net.

 

Thanks, Bob

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...