Horse fan 14 #1 Posted June 2, 2019 The 854 is not going into neutral only goes into 2nd or 3rd, any ideas? Thanks much! Share this post Link to post Share on other sites
wallfish 17,080 #2 Posted June 2, 2019 (edited) Sounds like the shifter forks got misaligned. Pull the shifter out and you will see the forks. When in neutral the hole will be a rectangle. You can move the forks with a large screwdriver. This commonly occurs from quick shifting between the gears and or a loose dog point set screw, and or a worn shifter. Sometimes the "doughnut" ring on the shifter comes loose if the little pin gets broken. Pull the shifter and inspect everything. Edited June 2, 2019 by wallfish 2 2 Share this post Link to post Share on other sites
Horse fan 14 #3 Posted June 2, 2019 Wallfish you are the man you were absolutely right, the old girl is all fixed thank you very much! 1 1 Share this post Link to post Share on other sites
wallfish 17,080 #4 Posted June 2, 2019 Glad you got her going. Sometimes the dogpoint screw tip gets a little worn down and the shifter will feel slightly sloppy. That can allow that misalignment of the forks to happen more frequently, especially when quickly shifting between gears. Just keep an eye on it and tighten up that screw once in a while. 1 2 Share this post Link to post Share on other sites
