Big 2019 WHShow buy sell trade thread

[dells68 7,498]

Considering selling my 414-8.  I just bought this from a friend, but I’ve got too many tractors and I’m picking up more next week at the show!  I replaced the ignition switch with a new one, new choke cable, and needs a starter - original one drags some.  I did put on a new starter but was disappointed when it worked great - two times.  I’m contacting the seller, might have a new one, not sure.  The carb needs to be rebushed, but otherwise she starts right up and runs great!  There are about 3 places on the deck that will need repair, but it mows great and is quieter than most of my other horses.  $700 or $550 just the tractor.

 

 

Edited June 13, 2019 by dells68

[Vinylguy 4,674]

15 hours ago, BOB ELLISON said:

@Vinylguy Terry if they were milk glasses I would take a couple. Sorry

No problem Bob I understand completely.

I like a good cold shot of milk every now and then myself. 

 

[953 nut 55,163]

3 hours ago, dells68 said:

hydraulic pump for a 953/1054.

PM sent.

[stevebo-(Moderator) 8,330]

Terry-

I will bring the whiskey so we can share a shot or three

[wallfish 16,994]

12 minutes ago, stevebo said:

Terry-

I will bring the whiskey so we can share a shot or three

Count me in!

Crown Royal special reserve if you're taking requests!

[stevebo-(Moderator) 8,330]

25 minutes ago, wallfish said:

Count me in!

Crown Royal special reserve if you're taking requests!

I am bringing the good stuff John. I will text you a picture... 

[BHunter 1,700]

On 6/11/2019 at 7:44 AM, Vinylguy said:

Do we have any Shot Glass collecting members? I will have some of these with me at the show for $5 each

Hold one for me. Thanks, Bob

[76c12091520h 3,610]

Kohler Engines lunch/drink cooler, made by Coleman, part # 47-800-48, measures 12 1/2" x 10"h x 9 1/2" brand new in box $100.00 

 

[dkg520 509]

Wheel Horse Disc.  Good condition $125

[ZXT 2,401]

7 hours ago, Vinylguy said:

No problem Bob I understand completely.

I like a good cold shot of milk every now and then myself. 

 

Hey Terry - If you have any left after the show would you consider selling and shipping me some? Thanks!

[Vinylguy 4,674]

24 minutes ago, ZXT said:

Hey Terry - If you have any left after the show would you consider selling and shipping me some? Thanks!

What ever I have left will be listed on the website. I will contact you when I return and make sure you can have first chance.

Thanks

 

[VinsRJ 721]

Update and addition....

 

416 single muffler and shield, good usable condition $60 obo

 

Mid 60's recovered seat cushions, new foam and nice new vinyl, mounted on original metal backers, bolt on and go $50

 

Best way to get a hold of me is through PM, Thank you, Vin

Edited June 13, 2019 by VinsRJ

[RJ Hamner 1,007]

GONE.  Pair of 16-6.50x8  4 ply   Tubeless  They are HiRuns from Tractor Supply that I bought at a good price. 

They have been on the tractor and made a trip from the shop to the back yard and back.

Going to use a different style on the rebuild. $40 for the pair  Can bring to the BS

 

Pair of tubes for the above tires (same mileage). 

Yea I know, the above tires are tubeless.

But I am the guy who wears a belt and suspenders

$20 for the pair  Can bring to the BS

Edited June 13, 2019 by RJ Hamner
Sold

[953 nut 55,163]

26 minutes ago, RJ Hamner said:

Pair of 16-6.50x8  4 ply   Tubeless  They are HiRuns

PM sent.

[BOB ELLISON 2,981]

I'm looking for

good starter

Good regulator-rectifier 

2 front rems

All for  my 1974  c160 

16hp engine.

Richard was to quick on the tires.

[RJ Hamner 1,007]

Looking for a 15 amp stator and rectifier for a K301

 

I have a 79 C81 “waiting in the wings” that’s going to need a new steering shaft.  (This one is going to be a challenge. It’s been sitting outside for at least 10 years)

[fast88pu 3,324]

 

36 minutes ago, BOB ELLISON said:

I'm looking for

good starter

Good regulator-rectifier 

2 front rems

All for  my 1974  c160 

16hp engine.

Richard was to quick on the tires.

Would these work? 

[fast88pu 3,324]

3 minutes ago, RJ Hamner said:

Looking for a 15 amp stator and rectifier for a K301

 

I have a 79 C81 “waiting in the wings” that’s going to need a new steering shaft.  (This one is going to be a challenge. It’s been sitting outside for at least 10 years)

Pm me a photo for the steering shaft you need and the other parts. I probably have

[RJ Hamner 1,007]

This might take a minute. We are in the middle of a thunderstorm and it's "outback"

[JoeM 7,873]

I will be at the show Thursday afternoon, I will have these items with me if anyone is interested.

Joe

 

Tecumseh 12hp covers $25

 

 

 

Loose Snow Plow Brackets $25 (Reserved for RJG854)

 

Rear Hitch $45 (Reserved for 702Timmy)

 

Box Scraper $150

 

D200 Rubber Pump Coupler insert. $10

 

 

Edited June 18, 2019 by OILUJ52

[702 timmy 25]

1 minute ago, OILUJ52 said:

I will be at the show Thursday afternoon, I will have these items with me if anyone is interested.

Joe

 

Tecumseh 12hp covers $25

 

4 wheel steer trailer made from WH frames. $200

 

Loose Snow Plow Brackets $25

 

Rear Hitch $45

 

Box Scraper $150

 

D200 Rubber Pump Coupler insert. $10

 

Atlas Snow thrower it runs make an offer.

I will take the rear hitch thanks tim

[Pullstart 62,831]

On 6/11/2019 at 7:55 AM, Lane Ranger said:

42 inch Sickle Bar Mower  $425      -THIS HAS BEEN SPOKEN FOR   SOLD!

 

See Rodney Burger or Lane Ralph at the Big Show.

 

 

44 Inch Mid-Grader Blade  (includes lift handle)    $350.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lane, is the mid mount grader still available?  I had someone call me looking for one.

 

Thanks, Kevin

[rjg854 11,356]

@OILUJ52 I'll take those snowplow brackets, if they are still available. 

[squonk 41,051]

@OILUJ52 I found some extra front wheel bearings for the 520. Stop and see me.

[JoeM 7,873]

702timmy, RJG854, and Squonk I got it.

thanks,
Joe