Big 2019 WHShow buy sell trade thread

[squonk 41,099]

On 4/14/2019 at 4:42 PM, Ed Kennell said:

More stuff.

 

Wheel Horse Turf Tires   No cracks and 1/2 tread left.    $40 pair

 

Old style front mule drives     $30 each

 

Cast clutch/brake pedals $15each     Foot rests   $20 pair      gear drive deck engagement pedal    $20

 

PTO parts     $15-$30

 

buckets of Attach - Matics       $30 each

 

Axle w/spindles       $30

 

Deck chute deflector    $10                                                     round guard  free if you tell me what it fits

 

Side drive swing arm deck drive belt tensioners      $30 each

 

36" deck hardware     new with the rear wheel axle    $40       used one   $20       deck lift arms   $10 each

 

 

3 buckets of tire chains         4 link   $25    2 link  $40   set

 

Ed, Any 16" chain sets? 

[Ed Kennell 38,166]

31 minutes ago, squonk said:

Ed, Any 16" chain sets? 

I don't think so Mike.    I need to dump the buckets and measure and  mark the pairs.    I'll let you know.    You could  buy 2-12" sets  and build a 16" set. 

[Ed Kennell 38,166]

On ‎3‎/‎21‎/‎2019 at 11:12 PM, Ed Kennell said:

Many parts and tractors for sale.    I will keep posting pics.  Pm me if you want info and prices on anything.

 

I still have some parts to a rear bagger.    Some parts have been sold.

The bagger is   SOLD

[Ed Kennell 38,166]

Brinly moldboard  plow          $150

 

[stevebo-(Moderator) 8,330]

I am looking for a pull behind lawn thatcher  ..

[Wheelhorse Wes 279]

Anyone have the belt guard for a commando 6? I’m restoring a “500 special” and I need the belt guard. It’s not embossed like the normal belt guard. Hoping someone has one

[Wheelhorse Wes 279]

Yes it is a true 500 special

[fast88pu 3,324]

7 minutes ago, Wheelhorse Wes said:

Anyone have the belt guard for a commando 6? I’m restoring a “500 special” and I need the belt guard. It’s not embossed like the normal belt guard. Hoping someone has one

Would it happen to be the same guard as an 800 special? 

[DJE 89]

Wheel Horse Dealer Sign. I’ve never had it lit up but was told it did. Needs cleaned up but is in great shape with no cracks to the plastic. No letters but those are available.

Asking $750.00 B/O. Price Drop to $550.00 Brought to show if paid for in advance. These don't come up for sale often. Neat garage decoration!

Edited May 29, 2019 by DJE

[Wheelhorse Wes 279]

8 hours ago, fast88pu said:

Would it happen to be the same guard as an 800 special? 

No it’s not the same....the one is need is for a tecumseh engine same as a commando 6

[WHX?? 48,815]

I might just have one Wes ... it's off a 656 if I remember right? Think that would fit?

BTW that 702 is mighty fine looking! 

Edited May 7, 2019 by WHX22

[dkg520 509]

Wheel horse snow blower $75.00. Metal is in good shape. Needs bearings.   Wheel horse cart  original paint. Wheels and rims are very good shape. No rust. $125.00. Parker lawn sweeper in very good condition . Excellent paint and brushes. Manual included. $100.00. 

[Ed Kennell 38,166]

On ‎5‎/‎4‎/‎2019 at 4:59 PM, squonk said:

Ed, Any 16" chain sets? 

Would these work Mike.    Brand new with tensioners.    $40

[squonk 41,099]

3 hours ago, Ed Kennell said:

Would these work Mike.    Brand new with tensioners.    $40

I need them to fit a GT-14 tire. Got any kicking around to try? 

Edited May 8, 2019 by squonk

[Ed Kennell 38,166]

3 hours ago, squonk said:

I need them to fit a GT-14 tire. Got any kicking around to try? 

Sorry, all I have are 12" tires.    I'll bring them to the show and you can see if they fit.

[stevebo-(Moderator) 8,330]

Interested in a power flow bagger with or without the deck for a 5XI machine. I have both a 48" and 60" deck already. Let me know if you have one. Might be interested in other XI attachments as well. 

[WVHillbilly520H 10,373]

Selling most of my gardening implements ...the rare 3 in 1 Wheel Horse Toolbar (with moldboard plow, disc and culivators $350, and my 36" tiller complete with 2 belts and idler pulley bracket and axle bracket/hitch $350...i will deliver these to the Big Show if paid for in advance, thanks Jeff.

[richmondred01 2,237]

I may do a quick round trip to the big show on first day (Thursday) 

(events have changed. I can no longer attend the show)

I currently have professionally 5 rebuilt k series and magnum engines. (bored, crank ground, valve seats ground)
New piston, rings, rod, crank bearings, some have new valves, new seals and gaskets. All aspects of these engines are within Kohler specs.
These are all wheel horse spec engines.
 mufflers  are available but not included.
Prices with rebuildable core.
 

(2) K301 $775.00 per engine
(2) K321 $825.00 per engine
Magnum 12 $825.00
 

Edited May 22, 2019 by richmondred01
Change of plans.

[dells68 7,498]

Here’s the first of my stuff to post.  I’ve got a very nice running 754.  Serial number is correct for a 754, as is the 7hp engine.  This is an older restoration with some paint peeling, but is still very presentable. Tractor has an all thread rod for a tie rod, but good tie rod ends.  The throttle knob is chipped, but I may have another original.  The seat has a rem minor cracks, but they haven’t weakened it.  Engine runs smooth, starts easy with no smoke or noises.  Transmission works great in all gears.  I need to switch the wires on the ammeter - I accidentally reversed them.  Asking $800 OBO.  Remember there aren’t many of these out there!                             SOLD

 

Edited May 14, 2019 by dells68
Tractor is sold

[Wheelhorse Wes 279]

On 5/6/2019 at 8:59 PM, WHX22 said:

im Selling my 701 I’ve got it listed in the classified part of the forum will be bringing it to the big show if not sold before hand

 

[Wheelhorse Wes 279]

C-100 parts

hood $40

fenderpan $40

runing boards(footrests) $20 pair

steering shaft with cast teeth $15

seat support bracket $15

mower deck lift rod $15

pedals $10 each

cast manual lift stop bracket $15

tie rods $5 pair

voltage regulator bracket $5

pto brackets $15 (sold)

complete dash assembly with choke and throttle cables $20

steering wheel with cap $30 I will be cutting the shaft to get the wheel free from the dash assembly 

complete mule drive $35

pto clutch assembly $15(sold)

belt cover/guard $30

mower deck(missing one cover) $100

pictures of items by email or by text my cell phone number is12263773103 

Edited May 19, 2019 by Wheelhorse Wes

[Sparky-(Admin) 21,315]

 GoodYear 23x10.5x12 Ag tires. These have never been mounted...but are older tires. Estimated to be about 8 years old. Bought by an old guy, stored in his shed and never mounted.

 SOLD $90 for the pair. SOLD

 Seat back rest bracket for the round hood type seats. 

  SOLD $25. SOLD

[Wheelhorse Wes 279]

875 parts

seat pan $20

dash $20

gas tank support bracket $10

gas tank strap $3

gas tank $15

front axle with spindles $20

hydro transmission rod $3

tie rods $5 pair

tool box $30

inspection plate $5

steering shaft with cast teeth $15

manual lift handle $15

attach a matic $15

hood $30

fender pan $20

rear set of tires/rims $50

complete hydro trans with hubs $100(sold)

the foot rests and pedals are still on the frame. I bought this complete tractor for the 8hp Kohler engine. It can be put back to a complete tractor again .....the thing that is missing is the engine and the dash tower (sold it already) steering wheel is sold too..will sell everything that’s left together as a whole if someone is interested in it that way ....the 1st picture is what is missing ,dash tower (sold)

2nd picture is what it looked like when I bought it. Pictures of items by email or by text. My cell phone number is12263773103 

Edited May 19, 2019 by Wheelhorse Wes

[Wheelhorse Wes 279]

953/1054 parts

mower deck hanger $15

pto clutch assembly..bearing is wobbly $20

long belt guard (from engine to transmission underside) $15

small belt guard (underside) $5

complete brake assembly $20

gas tank (has been patched.brazed)$20

brake pedal $10

front axle $30

(2) cast front nose weight, $60 each

LH steering knuckle $15

steering fan gear assembly $30

10hp engine tin/cover $10 (sold)

steering spindle $10

cast dash surround $20

head light buckets $40 pair(sold)

steering wheel(someone pried it off the shaft ,a bit of prying damage on bottom side of the center) $60

LH spindle $15

dash plate (damaged) $5

foot rests $20 pair

front tires/rims with center caps $30 pair

back tires/rims (tires are shot) $60 pair

transmission with hubs $120

10hp Kohler $80 needs to be rebuilt. I have a STD piston with connecting rod that goes with this engine. Doesn’t come with the carburetor but has starter generator brackets still mounted to engine 

pictures of items by email or by text

my cell phone number is12263773103 

 

Edited May 19, 2019 by Wheelhorse Wes

[dells68 7,498]

2 hours ago, Sparky said:

GoodYear 23x10.5x12 Ag tires. These have never been mounted...but are older tires. Estimated to be about 8 years old. Bought by an old guy, stored in his shed and never mounted.

  $90 for the pair.

Hey Mike, I’ll take them if they aren’t already sold.