What Hole For What Impliments

[71_Bronco 1,072]

I have a 1968 Commando 8 with the 8hp K181 Kohler. With the tractor, I got a plow blade w/ frame, rear axle mounts, and lift link, as well as a 36" rotary gear-drive deck.

 

I am hopefully going to be attaching the deck this weekend, and I am not sure what hole to put the link on.

 

I thought I saw a picture at one time, showing the lift holes and what they are typically used for, but I cannot seem to find that at the moment.

 

When I got the tractor, the link for the plow was on the tractor, but I took it off, and stupid me forgot to note what hole it was attached to.

 

At some point down the road, I will also be installing a new lift cable for the slot-hitch. My old cable was shot, so I had to remove it. If someone can show the correct hole for that as well, it would be very much appreciated.

 

Thanks!

[gwest_ca-(File Mod) 11,033]

Good question and often asked so put a file together you can print out.

This is from a later model but likely still applies to yours.

This is from an illustrated parts list.

Click on the picture

 

Garry

[71_Bronco 1,072]

27 minutes ago, gwest_ca said:

Good question and often asked so put a file together you can print out.

This is from a later model but likely still applies to yours.

This is from an illustrated parts list.

Click on the picture

 

Garry

 

Garry,

 

Thanks so much! That is exactly the picture I was looking for.