Axle brackets for blade

[RandyLittrell 3,877]

Will the axle brackets I have on my GT-14 work on my 310-8. They look like they should, but thought I would ask before pulling them off the 310. 

 

 

Thanks, Randy

Edited May 10, 2019 by RandyLittrell

[peter lena 8,583]

the brackets  need to be turned down, the nuts should be on top of the axel housing , suspending the hanger points. the rear mounting point bar on the plow frame will verify  that , pete  

[WVHillbilly520H 10,373]

10 hours ago, RandyLittrell said:

Will the axle brackets I have on my GT-14 work on my 310-8. They look like they should, but thought I would ask before pulling them off the 310. 

 

 

Thanks, Randy

I believe the GT14 are different from the B,C,3,4,500 series tractors... @wheelhorseman, check his website...https://wheelhorsepartsandmore.com/brackets-linkages.html ...

[gwest_ca-(File Mod) 11,033]

Early dozer models had the bracket the plow connects to mounted on the front of the axle housing like the GT-14 you show.

Later the bracket was bolted to the bottom of the axle housing.

 

If the dozer and brackets are from the same era it may work - I don't know.

 

Garry

[RandyLittrell 3,877]

Thanks guys, I didn't even think of looking on Wheelhorsemans site. Thanks guys, I will just buy some for the 310. 

 

 

 

 

 

Randy

[gwest_ca-(File Mod) 11,033]

The GT-14 A-frame in the 310 brackets will move the A-frame back about 2" to 3". Will it still work?

 

Garry