Ralph S 342 #1 Posted May 4, 2019 I broke something in the rear end of the 310-8 last week. A friend of mine donated a C-111 parts tractor to me and Bam ! I'm back in the game. 2 Share this post Link to post Share on other sites
953 nut 55,240 #3 Posted May 4, 2019 Good to have friends with parts tractors! 1 1 Share this post Link to post Share on other sites
Ralph S 342 #5 Posted May 4, 2019 4 minutes ago, 953 nut said: Good to have friends with parts tractors! Yes I do. Lol He wouldn't take anything for it Share this post Link to post Share on other sites
Ralph S 342 #6 Posted May 4, 2019 The C-111 was one year only but the rear end was used in a lot of models. It does have the 1-1/8" axles and the 310-8 had 1" 2 Share this post Link to post Share on other sites
Ralph S 342 #7 Posted May 5, 2019 It was a worthwhile upgrade. I put all new seals in it with 2 quarts of oil and she opperater smooth. I'll be trying it out at The Big Knob pull next Saturday. Hopefully it'll hold up Share this post Link to post Share on other sites
JAinVA 4,619 #8 Posted May 5, 2019 (edited) Biggest difference besides the axle size is the number of pinion gears in the diff.4 as opposed to 8.What you have in it now is what you need for pulling. Edited May 5, 2019 by JAinVA 1 1 Share this post Link to post Share on other sites
ebinmaine 67,508 #9 Posted May 5, 2019 Niiiice!! Awesome how universal these machines are. And free.... That's a handy friend to have around. 1 1 Share this post Link to post Share on other sites
Ralph S 342 #10 Posted May 5, 2019 3 hours ago, ebinmaine said: Niiiice!! Awesome how universal these machines are. And free.... That's a handy friend to have around. That's how we roll around here in Western Pa. 1 1 Share this post Link to post Share on other sites
Ralph S 342 #11 Posted May 25, 2019 It pulled great ! I did spring a leak on the right side axle seal. Luckily I bought a few extras. 2 Share this post Link to post Share on other sites
oliver2-44 9,753 #12 Posted May 30, 2019 On 5/24/2019 at 8:56 PM, Ralph S said: It pulled great ! I did spring a leak on the right side axle seal. Luckily I bought a few extras. That leak might indicate the axle bearing is worn, allowing the torque to deform the seal. With it jacked up and the tire off check if you can push the hub side to side and up/down. Any movement more than a hair, indicates slop in the axle bearing. Take care of that 1-1/8" 8 pinion, there tough as nails when there maintained. Thanks for pulling with a Wheelhorse! 1 Share this post Link to post Share on other sites
