gt14rider 804 #51 Posted March 9, 2020 Randy, I did a post on my gt14 tranny rebuild. Make sure you do a post on your tranny swap. 2 Share this post Link to post Share on other sites
gt14rider 804 #52 Posted March 10, 2020 Got some more done, looking at the 3pt hitch rear lift arms, I noticed that the welds were cracked on the small arms, further inspection the arms were cracked. So got some more metal and will be making a new one. Will put brass bushing in bearing blocks. 2 3 Share this post Link to post Share on other sites
RandyLittrell 3,885 #53 Posted March 11, 2020 On 3/9/2020 at 6:21 PM, gt14rider said: Randy, I did a post on my gt14 tranny rebuild. Make sure you do a post on your tranny swap. Thanks, I had missed your rebuild. I don't always check the tranny section, but I have it book marked now! Randy 1 Share this post Link to post Share on other sites
WheelHorseNut 222 #54 Posted March 23, 2020 Great job so far! I’ll be keeping an eye on this build as I just got my first GT14. What a great tractor! 1 Share this post Link to post Share on other sites
Pullstart 63,201 #55 Posted March 23, 2020 7 hours ago, WheelHorseNut said: Great job so far! I’ll be keeping an eye on this build as I just got my first GT14. What a great tractor! Where’s the Share this post Link to post Share on other sites
WheelHorseNut 222 #56 Posted April 15, 2020 On 3/23/2020 at 8:10 AM, pullstart said: Where’s the I’m gonna take one tomorrow...I was just out there today as the weather is getting warmer....what a wet mess I had in my backyard. I’ll see if I can find an older pic. Share this post Link to post Share on other sites
gt14rider 804 #57 Posted April 15, 2020 Thanks for looking, been busy with (Honey Do List )and working on RM 366 mower deck, bearings, repair bearing block, will get back to GT14 soon. Just got 2 plows at auction pics to follow. 1 Share this post Link to post Share on other sites
pfrederi 17,989 #58 Posted April 15, 2020 3 hours ago, gt14rider said: Thanks for looking, been busy with (Honey Do List )and working on RM 366 mower deck, bearings, repair bearing block, will get back to GT14 soon. Just got 2 plows at auction pics to follow. The deck that came with my GT-14 has a shell that is shot. i have no intention of fixing it. Mowing with a GT-14 strikes me as driving brads with a sledge hammer. If you need any parts let me know the mounting stuff is probably salvageable... Share this post Link to post Share on other sites
gt14rider 804 #59 Posted April 15, 2020 Thanks Paul, but run a tachomatic and run a 48" deck. Thanks for the offer. Share this post Link to post Share on other sites
