wallfish 16,994 #51 Posted March 30, 2019 On 3/28/2019 at 1:14 PM, pullstart said: It ran good” 15-20 years ago. Ha, the famous line "Ran good when parked" I bought an engine at the big show once just for the funny sign. It read "Ran at one time" 5 Share this post Link to post Share on other sites
Pullstart 62,838 #52 Posted March 31, 2019 Tools are in the back, the bed’s loaded with straps, chains, come alongs, binders, just in casers, fluids, jack, air compressor, blocks, and plenty of room for a Wheel Horse if it’s still there! We’ll head over to grab the shop trailer in the morning and hope for the best while we load! 2 Share this post Link to post Share on other sites
wallfish 16,994 #53 Posted March 31, 2019 GOOD LUCK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 1 Share this post Link to post Share on other sites
ebinmaine 67,451 #54 Posted March 31, 2019 1 hour ago, pullstart said: just in casers Most important parts/pieces 1 Share this post Link to post Share on other sites
Pullstart 62,838 #55 Posted March 31, 2019 We’re getting somewhere... I just don’t know if we’re at the easy or hard parts now! 3 5 Share this post Link to post Share on other sites
Pullstart 62,838 #56 Posted March 31, 2019 We’ll call stage 1 the easy part! 6 Share this post Link to post Share on other sites
Pullstart 62,838 #57 Posted March 31, 2019 That was a little bit of a butt pucker moment, but we’re all squared away and Rylee’s got herself a 1076 too! 2 8 1 Share this post Link to post Share on other sites
953 nut 55,197 #58 Posted March 31, 2019 58 minutes ago, pullstart said: Rylee’s got herself a 1076 too! Who cares what Dad got, Look at Rylee's new 2 2 Share this post Link to post Share on other sites
wallfish 16,994 #59 Posted March 31, 2019 1 hour ago, pullstart said: Rylee’s got herself a 1076 too! Nice score Rylee! 1 2 Share this post Link to post Share on other sites
Pullstart 62,838 #60 Posted March 31, 2019 Made it home! 5 Share this post Link to post Share on other sites
ebinmaine 67,451 #61 Posted March 31, 2019 2 hours ago, pullstart said: That was a little bit of a butt pucker moment, ...... HAHAHAHAHAHHA!!! but we’re all squared away and Rylee’s got herself a 1076 too! AWESOME!!! 1 Share this post Link to post Share on other sites
Tractorhead 9,064 #62 Posted March 31, 2019 Whow, what a cool Story Buddy, it seems you catch also a real Beast. Looked a bit smaller in the first pic, but after see it on the Trailer - nice.. it was pretty cool. Congrats to Rylee, she did a well purchase! A great catch you both did, congrats! 1 Share this post Link to post Share on other sites
WHX?? 48,815 #63 Posted March 31, 2019 Hey isn't that a tool a GT Mafia guy would use?!?! Could always use a gal who knows her way around an impact driver...may have to have her prospect for us! 1 1 1 Share this post Link to post Share on other sites
Achto 27,568 #64 Posted March 31, 2019 Congratulations on your purchase!! Really happy that Rylee was able to score a Horse on the pick. A word of advise with that 1010. Given the engine design with the plate connecting all of the cylinder sleeves, it does not fair well with short runs. So if you need to stop for a few minutes just leave it run instead of shutting it down. 1 1 Share this post Link to post Share on other sites
Pullstart 62,838 #65 Posted April 1, 2019 Best of all fellas, she scored it for $65! I haven’t ever gotten a deal like that, but I’ve sold parts out of a bundle that paid for the tractor... 2 1 Share this post Link to post Share on other sites
Pullstart 62,838 #66 Posted April 1, 2019 1 hour ago, WHX22 said: Hey isn't that a tool a GT Mafia guy would use?!?! Could always use a gal who knows her way around an impact driver...may have to have her prospect for us! I broke the lug bolts loose, but made her run the ratchet to pull the tire. The wheel is rotten from chloride I believe. When I handed her the impact to put it back together, I got a “Come on!” from her when she learned I planned that all along. 2 4 Share this post Link to post Share on other sites
oliver2-44 9,741 #67 Posted April 1, 2019 10 hours ago, pullstart said: That's quite a large bucket on that backhoe] Interesting set of weight under the front of the tractor to compensate for the hoe. You may find you still want to get a loader bucket full of material for weight if your reaching and digging a ways out with the hoe. Ok will let you get it running first. so since it's a 1010 is it a standard 4 speed with a hi/lo or is it a shuttle transmission. Share this post Link to post Share on other sites
Pullstart 62,838 #68 Posted April 1, 2019 9 hours ago, oliver2-44 said: That's quite a large bucket on that backhoe] Interesting set of weight under the front of the tractor to compensate for the hoe. You may find you still want to get a loader bucket full of material for weight if your reaching and digging a ways out with the hoe. Ok will let you get it running first. so since it's a 1010 is it a standard 4 speed with a hi/lo or is it a shuttle transmission. It’s a gear jammer, but everything on it is stuck right now. 2 1 Share this post Link to post Share on other sites
WHX?? 48,815 #69 Posted April 1, 2019 12 hours ago, pullstart said: she scored it for $65! Maybe you gonna have to loan her out to take on scores! She can give the seller the cute poor little girl look and "daddy I really want this one but only have $xx" 1 4 Share this post Link to post Share on other sites
Pullstart 62,838 #70 Posted April 1, 2019 35 minutes ago, WHX22 said: Maybe you gonna have to loan her out to take on scores! She can give the seller the cute poor little girl look and "daddy I really want this one but only have $xx" Oh yeah.... I told her how much cash to stuff in her little money box before heading to make the deal 1 1 Share this post Link to post Share on other sites
Pullstart 62,838 #71 Posted April 5, 2019 Unloading day My father inlaw’s shop needs the trailer back... 2 1 Share this post Link to post Share on other sites
Tractorhead 9,064 #72 Posted April 5, 2019 Hope it is movable or did anything blocks? think it will not be easy to move that Beast. but nice, nice.... 1 Share this post Link to post Share on other sites
Pullstart 62,838 #73 Posted April 5, 2019 It towed off the trailer fairly easy. Once it was on the ground, I had Rylee help steer it out of the way. Unloading didn’t move the truck and trailer that far! I even had the trailer chocked... 1 1 1 Share this post Link to post Share on other sites
ebinmaine 67,451 #74 Posted April 5, 2019 Good to see Kev. Good to see. I like your "hoe bucket lift system" 1 Share this post Link to post Share on other sites
6wheeler 603 #75 Posted April 7, 2019 (edited) On 3/28/2019 at 2:38 PM, Achto said: JD almost always used their own engines in farm & industrial tractors. I don't know a lot about the 1000 series, I do know that the 2010 was one of the worst tractors that JD ever made. They were under engineered and plagued with problems, transmissions being one of the main problems. I fully agree.. On the 1010 and2010 series there were tranny problems. The tranny's were well known for knocking gears out. Don't be surprised if the hydraulic pump has issues as well. The ag tractors were made for small "gentlemen" farmers ie; people w/5 acres and 2 horses. I think just so they could say they have a tractor. They were actually a pretty good PTO tractor (for an elevator or auger) . When the 2510 came out? There were a lot of the problems addressed and somewhat fixed. If you can get it cheap enough and need one ? Or, want one? Then fixing it might not be too bad. Fortunately, Much like our WH's? JD, still has parts available. But, as the saying goes. JD? Green like money. I really hope you can just put fresh gas in her? Fire her up ? And put her to work. You don't need all them extra gears to dig a hole . Don't think it is going to be a money maker (resale). Unless you have a serious collector, that really wants one of those? With the inherent issues they have makes them low priced. Good Luck....... Edited April 7, 2019 by 6wheeler 3 Share this post Link to post Share on other sites
