construction homemade snowplow

[wheeliepower 141]

Start of construction homemade snowplow

 

As an example I use a youtube video of a homemade snowplow

 

Delivery steel

First fitting

First I drilled a 20mm hole for attaching the bolt of the snow blade.

It looks like this with snow blade.

Then I drew a second plate to lock the snow blade.

After i have filed everything fitting the plate looks like this now.

Then I made a square hole in the steel profile.

Now you can lock the plow in different positions.

Then I welded iron blocks to the profile to compensate for the difference in the profile.

 

It continues the next days........................................................................

 

Edited March 23, 2019 by wheeliepower

[WHNJ701 4,165]

Looks good so far, should put the Pepsi cola crate on ebay

[wheeliepower 141]

I think I still become many money for the crate as old as this one is

 

[wheeliepower 141]

it continues with the homemade

 

Today sawed as the first individual profiles fitting.

Then I welded out of these parts a frame.

Then I attached this frame to my hollow profile.

So it looks finished welded.

.....and so incorporated.

Then I started making the tail.

The u-rail serves as a guide later.

This is what the finished hollow profile looks like.

On the tractor, this hollow profile is plugged into the trailer hitch.

Then I built another angle to raise and lower the hollow profile and thus the snow blade.

 

Now it is dark and I am closing time, because I no longer see the tool !!!!!!!!!!!!!!!!!!!!!!!!!!!

Edited March 23, 2019 by wheeliepower

[wheeliepower 141]

yes it works great. unfortunately I oversized the part a little bit (I will use a smaller profile wall thickness for the next project )