pfrederi 18,333 #1 Posted March 10, 2019 Finally got around to using a new toy I picked up last year. It crimps fittings on the end of hydraulic hoses. Not as fast as the big professional hydraulic criimpers but it is much cheaper . and i am not in that big a rush. Last picture shows new hose on my Charger(hose on the right). No leaks from that. Now i have to fix teh controlvalve itself. 6 7 Share this post Link to post Share on other sites
Skipper 1,789 #2 Posted March 10, 2019 Where would one go to get one of those? 1 Share this post Link to post Share on other sites
WHX?? 50,731 #3 Posted March 11, 2019 Good question Tom... Amazon prime free two day shipping? Probably not but I have seen them at a hydraulics fittings sites. Sure Paul will chime back in as to where he got his. Share this post Link to post Share on other sites
bottjernat1 2,190 #4 Posted March 11, 2019 I found these on amazon! Share this post Link to post Share on other sites
peter lena 9,088 #5 Posted March 11, 2019 good call on that pfrederi , we did a lot of Parker hydraulics and s/s tube line fittings , for our centrifuges. also made up a vise holding bracket for on site work, Parker tubing benders had a vise base built into them , so you always had a solid point to make your bends and finish work it. good info on that , Pete Share this post Link to post Share on other sites
pfrederi 18,333 #6 Posted March 11, 2019 I picked it up at a military vehicle show last year. Guy selling it had only used it once or twice and then figured out he needed their bigger model for 3/4 to 1-1/4 hoses. This one is 1/4'- 3/4" perfect for our horses Clever-tech Inc 107 Wood sedge ct McGregor IA 5257 1 Share this post Link to post Share on other sites
