Jump to content

 
Countdown To Christmas!
 

 
Sign in to follow this  
Followers 0
mr biggs

Wheel Horse c195 dually plow tractor

By mr biggs, in Wheel Horse Tractors

Recommended Posts

mr biggs    187

mr biggs
Posted

So this week we were back working on the C  195 dually setup now complete,  and the 72" in Wheel Horse snow  blade is just about done below are a  few pictures of the extensions of the plow it originally was a 54 inch wheel horse blade which is now 72"  can't wait to get it in action Burst_Cover_GIF_Action_20190214193429.gif.634228741199210097fcdb07a7720397.gif

IMG_20190306_185631_1551961894600.jpg

IMG_20190306_185544_1551961894466.jpg

IMG_20190306_195159_1551961894701.jpg

IMG_20190306_195206_1551961894759.jpg

IMG_20190306_185631_1551961300714.jpg

IMG_20190128_134354.jpg

  • Like 1
  • Excellent 4

Share this post

Link to post
Share on other sites
 

peter lena    8,726

peter lena
Posted

mr biggs, with the added side thrust and over all stress added to the plow end of your tractor , suggest you might try adding this, Pete

 

  • Like 2

Share this post

Link to post
Share on other sites
 

JoeM    7,874

JoeM
Posted

Looks great!

I had a WH plow I adapted and made 72" for my rhino. Really moved the snow.

Share this post

Link to post
Share on other sites
 

mr biggs    187

mr biggs
Posted

On my plow I'm just going to add two small chains one on each frame rail criss cross them to the plow and bolted to the frame so I still have my up and down movement ,  the chain will allow it to move slightly about 1-2  link each direction I will post some pictures when it's done and on my tractor next week hopefully 

  • Like 1

Share this post

Link to post
Share on other sites
 

Chris G    3,296

Chris G
Posted

Looking forward to seeing it all together.

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing
  • Similar Content
     
     
    • Burnerman
      Getting ready to push stuff around
      By Burnerman
      Had the day off so I figured I’d get the plow situation set while I wait for mower deck parts.
      I have the rear tires weighted to 90# ea. The old ag tires are dried out and have some cracks but still hold air tubeless. I have a set of chains but they do a number on the driveways I plow. I see a tire spray that’s supposed to improve traction. Anyone ever try it? Is there something out the to soften old rubber? I the really don’t wanna drop $160 on new tires when these still hold air. 😁
      That’s my 4”x3/16” plow edge. It’s a 50” long piece I got from the cut pile at the local steel yard. It was cheap and has lasted a long time. I flipped it for the first time. 
      I may put tubes and fill my fronts with RV antifreeze. I’m also gunna make a downpressure link soon. 
       I haven't used it to plow in about 5 years due to transmission issues that are now solved and some timing adjustments that quelled almost all of my engine knocks. 
    		 
×
  • Create New...