ebinmaine 67,896 #76 Posted May 11, 2019 7 minutes ago, wallfish said: Yeah, that's the guy that advertises for reproduction Panzer parts. I don't know him personally and have never had him do anything but I have talked to him on the phone about the possibility of doing some belt guards. I can tell from our conversations he knows what he's doing and you're right, he may be a good source to contact about this. Bob I apologize for being a little off topic here but I'm curious to know.... John, how did your conversation go about those belt guards? Were you looking for something custom or just reproductions for stuff that's a little hard to find for us? I ask because I've already had to modify a couple of my own on past builds and I'm going to need one or two more this next coming winter. Share this post Link to post Share on other sites
wallfish 17,051 #77 Posted May 11, 2019 1 minute ago, ebinmaine said: Bob I apologize for being a little off topic here but I'm curious to know.... John, how did your conversation go about those belt guards? Were you looking for something custom or just reproductions for stuff that's a little hard to find for us? I ask because I've already had to modify a couple of my own on past builds and I'm going to need one or two more this next coming winter. It was about reproduction RJ and Suburban belt guards. Search "Panzer Parts" on Worcester Craigslist if you want to contact him 1 Share this post Link to post Share on other sites
BOB ELLISON 2,981 #78 Posted May 18, 2019 Update. I did manage to get the 20 sets of metal from the prefab guy for a reduced rate. He does great work and now I'm in the process of making a full set. So we're back in business . 2 2 Share this post Link to post Share on other sites
BOB ELLISON 2,981 #79 Posted June 1, 2019 UPDATE Ok I have some good news and some bad news. I did get the metal for the seats and they are made as good as the originals. I have half of the asking price in materal alone. So a set will be $200.00 or $100.00 each. I didn't want them to be any more then the 1054/953 but it didn't work out. They did come out pretty good. I don't think anyone has ever made these and I can understand why. I'll sell only 5 sets before the Big Show to those that are not going. And I'll bring 10 sets to the show. 1 6 Share this post Link to post Share on other sites
ronwh 188 #80 Posted June 1, 2019 Bob, i can not make the big show, but will take a set. Thanks Ron 1 Share this post Link to post Share on other sites
Super-C 4 me 612 #81 Posted June 1, 2019 Bob Those look spectacular, I don’t think you will have any trouble selling those for that price. Hope you have a great show. Brian 2 Share this post Link to post Share on other sites
71_Bronco 1,072 #82 Posted June 1, 2019 Those seats look fantastic. I have one that came on my Brono 14 that's in decent shape. Would you be able to do more if the customer supplies a seat to strip and recover? This way you wont need new metal plates? Share this post Link to post Share on other sites
rjg854 11,396 #83 Posted June 1, 2019 As I said before, those look fantastic! I've already PM'ed you. I've gotta have a set 2 Share this post Link to post Share on other sites
19richie66 17,511 #84 Posted June 1, 2019 I’d put one of those up next to a factory seat any day. Very nice Bob! 3 Share this post Link to post Share on other sites
BOB ELLISON 2,981 #85 Posted June 1, 2019 11 hours ago, 71_Bronco said: Those seats look fantastic. I have one that came on my Brono 14 that's in decent shape. Would you be able to do more if the customer supplies a seat to strip and recover? This way you wont need new metal plates? The metal plates are the highest cost of all the materal. I'm still thinking on how to reduce the price. Ill keep posting updates. 1 Share this post Link to post Share on other sites
BOB ELLISON 2,981 #86 Posted June 3, 2019 Last update on the C160 seat. I have tried to lower the price from $200.00 to keep the cost in line with my 1054/953 seats. Because the metal plates are the most expensive parts I've had to supply, I've decided to lower the price and with the help of @bmiller0457reduce the cost to RedSquare members. if you supply the metal from your old seat. Sort of like a bottle deposit. The old metal must be clean and usable (not rusted out or through just clean metal ) I will deduct $25.00 making the price $175.00 for a set . (This is only for REDSQUARE MEMBERS ) (And only until the Big Show ends.) After the Big Show I'll change this Add to show the full price of $200.00. If you pm me before the Show ends and order a set I'll honor that. After the Big Show I should have enough metal plates to finish out this year. And after the Big Show I'll advertise on other sites to sell to everyone else. So if you are planing to get a set and are not attending the Big Show you will have to get them to me at your expense or have a friend take them to the Big Show for you. I'm putting this Add in the For sale section. @rjg854 bought the very first set. 2 3 Share this post Link to post Share on other sites
fourwheelhorseman 298 #87 Posted November 18, 2023 On 4/8/2019 at 6:28 PM, BOB ELLISON said: Thank you dell. But now I see why I didn't want to make these last year. So much work and money just to make one. So I'll have to make a dozen or two just to brake even. This is the most time consuming seat to make and now I have to weld the seat frame to make it. I’d like a set of your still making them? 1 Share this post Link to post Share on other sites
fourwheelhorseman 298 #88 Posted November 18, 2023 I’d just need the cushions and foam, my metal is in great shape, but the vinyl is brittle and cracking on both top and bottom. 1 Share this post Link to post Share on other sites
rjg854 11,396 #89 Posted November 18, 2023 Sorry, but Bob isn't making them any longer. Share this post Link to post Share on other sites
953 nut 55,499 #90 Posted November 19, 2023 9 hours ago, fourwheelhorseman said: I’d like a set of your still making them? Contact Lowell @wheelhorseman, he has all the tools and goodies that Bob was using to make those seats, not sure if he has started doing them yet. 2 Share this post Link to post Share on other sites
Handy Don 12,330 #91 Posted November 19, 2023 I just noticed the title of this thread. Made me wonder if there were male and female genders of the C160 seats, at what age they were able to reproduce, and what the offspring are like?! 2 Share this post Link to post Share on other sites
Maz91 202 #92 Posted November 20, 2023 2 hours ago, Handy Don said: I just noticed the title of this thread. Made me wonder if there were male and female genders of the C160 seats, at what age they were able to reproduce, and what the offspring are like?! I on the other hand read the title and was worried the seat would try to reproduce with ME!! 1 Share this post Link to post Share on other sites
Kelsey 91 #93 Posted July 28 Are the seat and back rest still for sale? Share this post Link to post Share on other sites
953 nut 55,499 #94 Posted July 28 7 minutes ago, Kelsey said: Are the seat and back rest still for sale? On 11/18/2023 at 5:36 PM, rjg854 said: Sorry, but Bob isn't making them any longer. Share this post Link to post Share on other sites
Handy Don 12,330 #95 Posted July 28 7 minutes ago, Kelsey said: Are the seat and back rest still for sale? This is an old thread, if you notice the dates. Bob Ellison has since retired from seat making. Share this post Link to post Share on other sites
Bill D 1,928 #96 Posted July 29 Bob hasn't been on here since May. Does anyone know how he's doing? Share this post Link to post Share on other sites
19richie66 17,511 #97 Posted July 29 1 hour ago, Bill D said: Bob hasn't been on here since May. Does anyone know how he's doing? He’s on Facebook. I see things from him every now and then. I believe he is doing okay. 1 1 Share this post Link to post Share on other sites
Kelsey 91 #98 Posted July 29 23 hours ago, Bill D said: Bob hasn't been on here since May. Does anyone know how he's doing? Contact Lowell @wheelhorseman, he has all the tools and goodies that Bob was using to make those seats, not sure if he has started doing them yet Thanks, but this is the reason I asked. Share this post Link to post Share on other sites