Firebug 267 #1 Posted February 21, 2019 does anyone have pictures of the gas tank and brackets for a 314. I started reassembly and don’t quit remember how they all went on. I took pictures but they don’t clearly show me how I took it apart. Any help is appreciated Share this post Link to post Share on other sites
daveoman1966 3,762 #2 Posted February 21, 2019 hERE IS A 314-A. Should be the same setup. 1 Share this post Link to post Share on other sites
cleat 6,386 #3 Posted February 22, 2019 These may help as well. Cleat 1 Share this post Link to post Share on other sites
richmondred01 2,239 #4 Posted February 22, 2019 If it’s a hydro don’t forget the filter mounting bracket Share this post Link to post Share on other sites
Firebug 267 #5 Posted February 22, 2019 That helps out a lot. Thanks guys. It’s not a hydro. Got the tank and brackets on. Now I just need to figure out where these 2 brackets go 1 Share this post Link to post Share on other sites
richmondred01 2,239 #6 Posted February 22, 2019 The one on the right goes on the seat/fender pan and is utilized to hold the lift cylinder for the seat. the one on the left goes on the passenger side running board and is the drive belt guide. 1 Share this post Link to post Share on other sites
Firebug 267 #8 Posted February 22, 2019 I really appreciate it. I thought I took good pictures as I was disassembling but when I went back through them I couldn’t find pics of these parts 2 Share this post Link to post Share on other sites
