no spare parts => build by yourself

[wheeliepower 141]

Because the shipping of spare parts from usa to Germany is very expensive, I built this part of my handbrake because it did not work

 

Unfortunately I have to paint it black because I do not have red "wheel horse" color

 

After the installation, the function test follows

 

regards

 

manfred

 

[oliver2-44 9,753]

That should work!

[JoeM 7,874]

Looks good Manfred.

Something I have done for parts going to Europe. If you know someone traveling to the states and need some small not to heavy parts they can bring them back. I have shipped to an address where that person is and they packed it in their luggage.

Just a thought.

[953 nut 55,237]

                           That looks better than the factory part.                         

[wheeliepower 141]

function test successfully completed 

[wheeliepower 141]

progress

I have now installed a hour meter. I think it's important to have if I use a motor without oil filter.

 

Edited February 16, 2019 by wheeliepower

[wheeliepower 141]

then i have worried an accident trailer. he has cost $ 35. I had to install a new access pipe.

Then I built a box of wood for transporting tools and still mounted a support wheel and magnetic tail lights.

[wheeliepower 141]

next i install a working ammeter. but it still takes parts come from usa.

I still need a picture of the lawnmower deck from below (where you can see the blades). There I have to fix the sheets between the knives.

 

who can do a picture, I would be very grateful

[wheeliepower 141]

one more part I had to make myself, the grip of the lever of the belt pretension of the drive belt.

 

Unfortunately, the import from the US is very expensive, so my low budget version

 

 

[wheeliepower 141]

"transformation" bolt

 

this is a bolt for attaching the snow blade to my homemade snowplow. Unfortunately with the curvature it was too short.

 

Since I did not have the possibility of heating I cut through the bolt and welded everything together again 

 

Then I welded another stop at the top of the bolt.

 

Now I am already waiting two weeks for my delivery iron profiles. Then  I can start to build the frame for the snowplow.

 

 

 

 

Edited March 20, 2019 by wheeliepower

[wheeliepower 141]

The steel delivery for the self-made snowplow has just been delivered  

 

As a basis I build the snow plow like someone has built this myself on youtube.

 

Edited March 21, 2019 by wheeliepower

[wheeliepower 141]

attitude in another rubric

 

 

 

Edited March 23, 2019 by wheeliepower
attitude in another rubric