jimbo7921 8 #1 Posted January 10, 2019 Hi there was looking to fab up the trigger or handle that u use to swivel the plow. Was wondering if anybody had dimensions of that part. Thx for your time. Jim Share this post Link to post Share on other sites
The Tuul Crib 7,336 #2 Posted January 10, 2019 to !! Share this post Link to post Share on other sites
SPINJIM 1,981 #3 Posted January 10, 2019 I needed that part a few months ago, and found one on ebay. It wasn't worth the trouble of trying to fabricate one myself. I think that there is still one available, brand new, on ebay. Good luck. Jim 2 Share this post Link to post Share on other sites
pfrederi 17,667 #4 Posted January 10, 2019 Rod is 3/8" x 4-3/4" Inner tab is 1/2 x 2-3/8" Outer tab is 1/2 x 1-1/2" 1 Share this post Link to post Share on other sites
jimbo7921 8 #5 Posted January 10, 2019 Thx fir the picks and dimensions pfrederi. Thx for the suggestion jim but i work in a fab shop so the $45 on ebay is a little rich for me. 1 Share this post Link to post Share on other sites
cleat 5,809 #6 Posted January 10, 2019 (edited) This is how I built mine. Snow blade turn handle overview.pdf Cleat Edited January 10, 2019 by cleat 2 Share this post Link to post Share on other sites
jimbo7921 8 #7 Posted January 10, 2019 All done took about 15 mins finished 3 Share this post Link to post Share on other sites
jimbo7921 8 #8 Posted January 10, 2019 Better work or i will b peeved... i guess thats what i get for waiting for the snow to show up first. Share this post Link to post Share on other sites
