JCM 9,425 #1 Posted January 9, 2019 Back on Oct 1 2007 there was a post from thirdroc17 about a hub puller for WH rear hubs, it appeared to be a very nice and simple design.Does anyone know if this member is still with us and or have used this puller. Also any info or comments would be appreciated Thanks. Share this post Link to post Share on other sites
953 nut 55,909 #2 Posted January 9, 2019 Don't know what his puller was, but I just built one like this one and it is great. 3 1 Share this post Link to post Share on other sites
ebinmaine 68,514 #3 Posted January 9, 2019 Jim I can't search that one either but what I do is use a large 3 jaw puller and remove the Jaws and put 5 bolts between two Wheelhorse hubs. One on the tractor. One off the tractor. Still takes a fair amount of patience and it doesn't work 100% of the time because I do not always have that fair amount of patience. 3 1 1 Share this post Link to post Share on other sites
rmaynard 15,633 #4 Posted January 10, 2019 I don't know if Dale still hangs around here, but he can be found at the other Wheel Horse forum http://www.wheelhorse.org using the same user name "thirdroc17". I saw him post as recently as December. 1 Share this post Link to post Share on other sites
