Hopeless

[The Tuul Crib 7,336]

 Started to look this deck over that I picked up with my 1067 and oMg!! It appears that somebody  got a little happy with their welder and welded everything on this deck together not sure if I can save it or not I think the only good thing might be the hubs!

[WHX?? 48,783]

Those might grind down ... depends on worth the time and the effort if the rest of it is not rusted through.

[The Tuul Crib 7,336]

I did manage to get the hubs off and save those not sure about the spindles and a lot of the hardware in brackets I got off deck is in pretty bad shape.

[JoeM 7,871]

I guess it what you want to do with the deck. Not a ground up restoration candidate for sure. But I've seen them worse then that and run.

Buy the looks of it, I figure under those deck mounting brackets are cracks.

As far as the spindle areas, they sell an reinforcement weld in ring for those areas. E bay description "Weld in replacement patch for Wheel Horse Mower deck ...Spindle"

With just the pictures shown, I would probably take the parts off that are good and cut the losses.

[Herder 2,354]

I have a post in the implement section.  On rotary left behind, in second pic its the third deck in. It's for an older tractor mid to late 60s.  From what I recall it's in good restorable condition.  I don't know what it's worth as far as punches and shipping.  Or if you would be interested. 

[The Tuul Crib 7,336]

20 minutes ago, Herder said:

I have a post in the implement section.  On rotary left behind, in second pic its the third deck in. It's for an older tractor mid to late 60s.  From what I recall it's in good restorable condition.  I don't know what it's worth as far as punches and shipping.  Or if you would be interested. 

Can't find that thread  do you have some pics of it

[ztnoo 2,298]

2 hours ago, The Tool Crib said:

Can't find that thread  do you have some pics of it

 

I've done numerous different searches on this as stated by @Herder, and I cannot find what is being referenced either........

Edited January 6, 2019 by ztnoo

[The Tuul Crib 7,336]

4 minutes ago, ztnoo said:

 

I've done numerous different searches on this as state by @Herder, and I cannot find what is being referenced either........

I can't either , maybe he might chime in and see this?

[ztnoo 2,298]

Actually links to references avoid lots of searching and time consumption.........

[Herder 2,354]

The 3rd back in is the older style, sorry it's not the best photo.  Currently the decks are palletized and wrapped.  If it looks slightly similar to yours let me know.  I am in & out of the shop most of the day.  I brought home a 414/8 and it's been occupying most of my time and is starting to piss me off.  May need a break.

Edited January 6, 2019 by Herder

[ztnoo 2,298]

I finally found the thread referred to.

It was in the Picture Gallery ........and that wasn't really made clear in the post.

I was actually looking in forum categories and classifieds.

There's a second pic that might help @The Tool Crib identity the deck.

 

 

 

[WHX?? 48,783]

I also have the original deck for a 1067 and would be willing to part with it to a good home. It's buried in  winter storage so no pics for now. Very savable shape tho. Last couple of '67 scores yielded some drives and quick attach brackets that I can part with as well.