HL-5 light kit switch

[formariz 11,987]

Does anyone have any good photos of the original switch and bracket for the HL-5 light kit? Specs on switch such as manufacturer also needed.

Many thanks everyone.

[TT-(Moderator) 1,131]

I can tell you they're Cole (Hersee?) switches and have "Cole Boston" stamped on the side. It's also the same switch that was used for the early electric PTO clutch.

I don't have any other specs on them but I could get you measurements if needed.

The switch beside the tail light in this picture is NOS WH P/N 5273. The other switch is a new C-H part that is identical other than the "color"

I can't help you with a bracket or a picture, but I know that one would be easy to fabricate.

[formariz 11,987]

Thanks TT.

That looks like the Cole Hersee 5007.I gather that the knob color on original was the same color? What brand was the rear light?

[TT-(Moderator) 1,131]

The original knob for the HL-5 switch was ivory and the electric PTO clutch knobs were black.

The tail light in that picture is a Griffin 120 / SAE-P-62. I believe Peterson Manufacturing (PM) also made that same light.

Some of the HL-5 headlights are actually PM 401 chrome utility lights.

[Sarge 3,463]

Just FYI- you can go to Cole-Hersee's website and use their interactive catalog or download the pdf version to look for available switches/parts . Many of the old stuff they used back in the day is still around . Once you have a part number of theirs you can get lucky sometimes finding warehouse buyers that still have stock left . I got some 3-prong ignition switches this way.

Sarge

[linen beige 14]

Although the pics aren't very clear, this might help.

http://www.wheelhorse.org/manuals/Prior%20...Accessories.pdf

The HL-5 is toward the bottom. These switches were used for loads of things in the sixties so should be fairly easy to find. The bracket looks easy enough to fab up.