SylvanLakeWH 25,490 #1 Posted December 19, 2018 Critiques? Thoughts on how he could have achieved a straighter cut on top of the hedge? Better way to self-center the straps? Captions anyone? 4 5 2 Share this post Link to post Share on other sites
Mows4three 826 #2 Posted December 19, 2018 Sylvan Lake: It's pretty obvious to me that he needs ag tires, not turf tires. Duh! Cheers! Dave 1 4 Share this post Link to post Share on other sites
ericj 1,578 #3 Posted December 19, 2018 had to use the Husqvarna to do it, the crane couldn't support the wheel horse. The wheel horse was to heavy eric j 2 5 Share this post Link to post Share on other sites
roadapples 6,983 #4 Posted December 19, 2018 That's not a Wheel Horse... What's your point... 5 Share this post Link to post Share on other sites
ebinmaine 67,266 #5 Posted December 19, 2018 And he's not even wearing a hardhat.... How's he gonna trim the corners ???? Wouldn't need to worry about self-centering if he had used an engine/transmission tilter at the connection point. 2 3 Share this post Link to post Share on other sites
The Tuul Crib 7,336 #6 Posted December 19, 2018 Please keep hands and feet inside the ride at all times and don't exit until the ride has come to a complete stop!! 4 7 Share this post Link to post Share on other sites
Mows4three 826 #7 Posted December 19, 2018 13 minutes ago, The Tool Crib said: Please keep hands and feet inside the ride at all times and don't exit until the ride has come to a complete stop!! Oh that's funny.... Made me chuckle. Cheers! Dave 2 Share this post Link to post Share on other sites
WHNJ701 4,165 #8 Posted December 19, 2018 it's a fake photo! nobody would spend that money set up crane for something dumb like that 1 1 Share this post Link to post Share on other sites
953 nut 55,065 #9 Posted December 19, 2018 Here is another OSHA Poster-boy! Is this an Oxymoron , or is just a plain old moron? 2 6 Share this post Link to post Share on other sites
bottjernat1 2,190 #10 Posted December 19, 2018 Just a little off the top please! LOL! 1 3 Share this post Link to post Share on other sites
WHX?? 48,766 #11 Posted December 19, 2018 I'll just sit here and wait for the crane to hit those power cables... 1 5 Share this post Link to post Share on other sites
oneroadkingman 53 #12 Posted December 19, 2018 Hold my beer and watch this honey! 1 4 Share this post Link to post Share on other sites
peter lena 8,580 #13 Posted December 19, 2018 the right way to do it, pete 3 1 Share this post Link to post Share on other sites
953 nut 55,065 #14 Posted December 19, 2018 5 hours ago, peter lena said: right way to do it Who cares about the right way to do it? That's no fun! Anybody can do it right, no entertainment value there! 3 4 Share this post Link to post Share on other sites
The Tuul Crib 7,336 #15 Posted December 19, 2018 7 hours ago, WHX21 said: I'll just sit here and wait for the crane to hit those power cables... 2 1 Share this post Link to post Share on other sites
DennisThornton 4,769 #16 Posted December 20, 2018 Yes, but how did he do the sides? 1 2 Share this post Link to post Share on other sites
BOB ELLISON 2,980 #17 Posted December 20, 2018 You can not fix stupid. ..... 3 Share this post Link to post Share on other sites
The Tuul Crib 7,336 #18 Posted December 20, 2018 7 hours ago, BOB ELLISON said: You can not fix stupid. ..... 2 Share this post Link to post Share on other sites
