What is the correct belt needed for 42" snowblower

[Pat Marchwick 88]

What is the correct belt for a 42" blower on a 260 series machine ?

thank you

[Pat Marchwick 88]

Blower model number is 79263 .

[pfrederi 17,667]

according to parts manual 94-2879

 

1/2" x131.5 inches

 

Edit;  Found it only $146.63  over a dollar an inch...wow!!!

 

Edited December 6, 2018 by pfrederi

[peter lena 8,582]

https://offroadbelts.com/product/dd-powerdrive-e125-v-belt-1-1-2-x-131in-vbelt,  just looking around, slightly better price, pete

[gwest_ca-(File Mod) 11,033]

For some reason the belt changed to 94-2999 for 2000 and newer models and can not find the dimensions of it.

Toro still supplies the 94-2879 and 94-2999.

 

Garry

[1995 520H+96+97 937]

7 hours ago, gwest_ca said:

For some reason the belt changed to 94-2999 for 2000 and newer models and can not find the dimensions of it.

Toro still supplies the 94-2879 and 94-2999.

 

Garry

 

131.50" is what they state.

https://www.propartsdirect.net/94-2999-toro-belt.aspx

[gwest_ca-(File Mod) 11,033]

Saw that in a few locations and some have a ? after the length so guess I'm not the only one wondering. Perhaps the two are constructed differently.

 

Garry

[peter lena 8,582]

this entire issue seams strange to me , first off , a 1/2" belt to drive a snow blower ? typically a 5/8" width is needed for the pull power on a 42 " snow auger. next is the 131" size vs. the more typical 69 " length, this belt is driven off the pto point, yet it requires a 62 " LONGER belt  for this blower ? what am I missing on this problem ?   I have 42" st01 on my 312-8 , with a tech o matic hook up , my belt is a Kevlar 5/8" x 69" , this should be pretty simple to figure out , pete

[pfrederi 17,667]

1 hour ago, peter lena said:

this entire issue seams strange to me , first off , a 1/2" belt to drive a snow blower ? typically a 5/8" width is needed for the pull power on a 42 " snow auger. next is the 131" size vs. the more typical 69 " length, this belt is driven off the pto point, yet it requires a 62 " LONGER belt  for this blower ? what am I missing on this problem ?   I have 42" st01 on my 312-8 , with a tech o matic hook up , my belt is a Kevlar 5/8" x 69" , this should be pretty simple to figure out , pete

 

 

260 is a vertical shaft tractor completely different PTO hook up.

[peter lena 8,582]

mystified , maybe if I looked at things like this , I could relate  . thank you for the , model difference, pete