Chris1055 106 #1 Posted December 6, 2018 Hi guys. I’m replacing the cross shaft bearings in my snowblower. Didn’t want to pay the toro price of 60 a bearing so I looked the thread up on the replacement and I actually found a pair sb205 bearing that will work. But the number for the reducing bushing i can’t look up the number. Is it a Bronze with a flat back ?? I would greatly appreciate for some info on it and where I could find one. Thanks Share this post Link to post Share on other sites
Achto 27,505 #2 Posted December 6, 2018 Is this the style that you are looking for? If so, figure out your inside dimension, outside dimension and length. Then try your local hardware store or Tractor Supply. Share this post Link to post Share on other sites
Chris1055 106 #3 Posted December 6, 2018 That’s what I’m trying to figure out. My question is are they using the style with the flat backing them? The dimensions I know. 7/8 putter 3/4 inner Share this post Link to post Share on other sites
roadapples 6,983 #4 Posted December 6, 2018 The ones I used did not have that outer edge... don't think I had room... Share this post Link to post Share on other sites
jay bee 896 #5 Posted December 7, 2018 (edited) @rmaynard did a nice post on this subject and @WHX21 did a great follow up that has helped me rebuild a couple of my snow blowers. Hopefully it will help you also. Edited December 7, 2018 by jay bee 1 1 Share this post Link to post Share on other sites
