Jump to content
mmmmmdonuts

Hot Engine slowly dying after PTO engaged

By mmmmmdonuts, in Engines

Recommended Posts

mmmmmdonuts    274

mmmmmdonuts
Posted

I have a 1991 520h and I can mow for hours on end until I turn the tractor off and then restart it. The tractor restarts nice and easy warm but when I engage the PTO (mower deck) it slowly kills the engine. If I disengage the PTO it revs right back up. It is an electric clutch. I was thinking if it was a kill switch wrong I would imagine it would kill it a lot faster than allowing me to cycle on and off the PTO. Any thoughts? 

Share this post

Link to post
Share on other sites
 

lynnmor    7,361

lynnmor
Posted

Watch the governor, does it pull the carburetor fully open when the engine is dying?  If the throttle is open and the power is low, clean the carburetor.  If no improvement, check compression and adjust the valves.  It could be a loose valve seat and they can run pretty good and have near normal compression till it is too late for an easy repair.  

  • Like 1

Share this post

Link to post
Share on other sites
 

N3PUY    1,031

N3PUY
Posted

Check the battery voltage before and after engaging the PTO.  Low voltage will cause poor engine performance.  

  • Like 1

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • Poppa Phill
      60 inch Deck Mule
      By Poppa Phill
      Ive Got an 88 520 and a 60 inch deck. 
      My 522 gave up the ghost and being up here in maine I refused to buy a JD .
      Needing the deck mule with the spring,
      also looking for a soft cab.
       
      Thanks
    • Joe Reese
      60 Inch Mower Deck
      By Joe Reese
      60 Inch wheel horse mower deck with no rot. All spindles greased and spin smoothly. Comes with mule pulley guard & deck belt covers and the rare offset front mule. Has standard blades installed. Have brand new gator mulching blades for an additional $50 Great       Joe Reese    



    • Duramax7man7
      $1,175 OBO [419 hrs] 93 312-8 w/ 520h FS Axle + 42" Deck
      By Duramax7man7
      Very Solid tractor!

      Newer Agro Tires on Rear and Solid Front Turf Tires. Wheel Weights on rear. Fully Swapped Forward Swept axle off of 520h. I ran my 60" Deck on this tractor for over a year with no issues. 
      Deck it solid top to bottom with no rot and newer blades. Belt and Pulley are good to go! 
      She's just a little dusty and needs a cleaning. Can get a nice Seat a Tractor Supply. 
       
      $1175 OBO   -POOS

      (248) 9for3-8six3four Text or Call. I do not visit this site enough. God Bless. 

      NEW SEAT INSTALLED ON THIS TRACTOR! Started it up and ran it for a while yesterday... Forgot how nice this thing is. Tempting to keep it but it's time to send her one her way. GREAT TRACTOR! 


       


    • lsc1257
      1996 Wheel Horse 520H With 48 Inch Deck
      By lsc1257
      I have a 1996 520H Wheel Horse for sale.  The tractor has just over 800 hours on it.  It comes with a 48 inch deck.  The deck is a 1995 and has over 1,500 hours on it, as it came brand new with my 312-8 that I sold several years ago.  This 520-H has the swept front axle so it can handle a 60 inch deck.  I just replaced the battery and the deck belt this summer.  The engine is a 20HP Onan and it starts right up but requires the full choke.  The transmission is an Eaton 1100-062, hydrostatic.  The deck is in rough shape but the spindles appear to be in good working order.  The right rear tire has some cracking.  The original operator's manual for the 520H is included, as is the original operating and maintenance instructions for the deck, plus the installation instructions for the deck.  Also included is a new PTO belt and several miscellaneous deck wheels and rollers.  Additional pictures available upon request.  Asking $500.



    • Joe Warren
      Service Tool Kit, Onan, ON-420-0556
      By Joe Warren
      Wheel Horse
      Service Tool Kit
      Onan Industrial Engines
      ON-420-0556
       
      Kit is missing oil filter tool, otherwise complete. Tools in excellent condition. Small crack in plastic case, bottom, middle. 
       
      $129 plus shipping cost.
       
      Message me if you are interested in purchasing. Thank you. Joe


×
×
  • Create New...