Axle id

[Realwhiteboy 0]

I have a 8 speed axle,3 speed with reverse and high and low option. It has what looks like a 8 to 10 inch pulley with a tapered shaft. Also has disc brake and tge high and low shifter is at the back of the axle. Anyone know which one this would be?

[The Tuul Crib 7,337]

 Welcome to red square! Not  sure what you have what you need, but pictures will help bunches somebody should be a long that can help as well!  Welcome to the addiction !

[pfrederi 17,886]

What is the diameter of the axle shaft itself...1" or 1-1/8"

[stevasaurus 22,870]

Like Paul said...axle diameter and a picture of the left and right side of the trans.  See if there are any numbers & letters up by the shifter...casting date. 

[gwest_ca-(File Mod) 11,101]

Sounds like a Foote transmission

Garry

[Realwhiteboy 0]

Not sure size of axle shafts at the moment  has 5x4.5 hubs an 12 inch wheels. The pulley is vertical instead of on top. 

[stevasaurus 22,870]

post a picture...it will make it easy to ID then.  All axles are either 1" or 1 1/8" and we have 8 speed trannys with both.