Don thraen 3 #1 Posted August 13, 2018 I was just giving a snow blade for my Toro wheel horse 310 - 8 how do you attach it I came with a quick attach on the for the back axle but the blade assembly is too short that blade hits the front of the tractor pivot for the blade handle sits underneath my foot rest and lift linkage doesn't come close to where it needs to be is there an adapter or something that I need to hook this up Share this post Link to post Share on other sites
daveoman1966 3,745 #2 Posted August 13, 2018 Are you sure you have the right A-frame. There is a dozer A-frame made for a SHORT tractor, and another for a LONG FRAME traftor...they are NOT the same, and neither is the Axle bracket. It should look like this one...axle bracket is shown too. I'm also posting a pic of a SHORT FRAME dozer blade...(not for the 310-8). 4 Share this post Link to post Share on other sites
953 nut 55,081 #3 Posted August 13, 2018 Looks like Dave has given you all the information you need on this subject. All I can add is this list of what implements fit what tractors. 1 Share this post Link to post Share on other sites
Lee1977 6,643 #4 Posted August 13, 2018 From the old pinned snow blade post, the standard long frame blade was 64 1/2" from the center of the rear hitch bar to the center pin where the blade attaches. That information is from my memory. The thread was loss some years back during the forum moving. Share this post Link to post Share on other sites
