Axle seals for a B- 100 automatic & C-160 auto

[LFDRET 21]

Does any one know where I can find axle seal for a 1975 B-100 automatic and a 1978 C-161 automatic

Edited August 13, 2018 by LFDRET

[ol550 830]

Just look at the bearing and seal cross reference pinned at the top of this section. If you need part numbers just go to the manuals section.

[LFDRET 21]

My wheel Horse part manual for the C-161, calls for seal 6449.  But I can not find the B-100 auto parts manual. Or a cross ref. to 6449.   need Help!!!

the seal cross ref. I only see 4 & 8 speed, no Automatic cross ref.

 

Bill

[ebinmaine 68,433]

Perhaps @stevasaurus knows?

Or...

Have you called Lowell?

Wheelhorse parts and more.

One of our vendors. Great guy.

[gwest_ca-(File Mod) 11,101]

Click on the pictures

1974 tractor model 1-0510 axle seal WH # 100607 = SKF/Chicago Rawhide # 9878 - 1" ID, 1.5" OD x 1/4" wide

1975 tractor model 1-0511 axle seal WH # 100607 = SKF/Chicago Rawhide # 9878 - 1" ID, 1.5" OD x 1/4" wide

WH # 6449 = SKF/Chicago Rawhide # 11124 - 1-1/8" ID x 1-5/8" OD x 1/4" wide

 

Here is a SKF/Chicago Rawhide interchange for all seals

http://www2.chicago-rawhide.com/popup_parts_lookup_457012.htm

 

Garry

[stevasaurus 22,871]

Garry got it for you...the 6449 is SKF 11124 and it would be the same for both horses. 

 

I am editing this to say that the above is not true...it seems he has 1" axles on the B-100.  Sorry. 

[pfrederi 17,886]

You might also try National (Timken) 471652.  I started using those on my Sundtrands.  The outer lip seems more pronounced...may keep more crap out  CR green Timken red

[LFDRET 21]

My wheel Horse part manual for the C-161, calls for seal 6449.  But I can not find the B-100 auto parts manual. Or a cross ref. to 6449.   need Help!!!

the seal cross ref. I only see 4 & 8 speed, no Automatic cross ref.

 

Bill

 

 

Thanks guy's your the best

 

Bill

[stevasaurus 22,871]

Those cross reference numbers pinned at the top are only for manual transmissions.  I think if you read through the whole thread, we do put that #6449 seal information in there. 

[LFDRET 21]

On 8/13/2018 at 5:04 PM, LFDRET said:

My wheel Horse part manual for the C-161, calls for seal 6449.  But I can not find the B-100 auto parts manual. Or a cross ref. to 6449.   need Help!!!

the seal cross ref. I only see 4 & 8 speed, no Automatic cross ref.

 

Bill

 

 

Thanks guy's your the best

 

Bill

the B- 100 Auto has a 1" axle   does anyone have a cross ref. for this size

[ebinmaine 68,433]

My 1974 b80 has 1 inch axles in a 4-speed manual. Maybe the chart would give you the correct seal number using that information?

[pfrederi 17,886]

49 minutes ago, LFDRET said:

the B- 100 Auto has a 1" axle   does anyone have a cross ref. for this size

 

 

 

Gary gave you the number earlier in the thread

 

[stevasaurus 22,871]

I was wondering if Wheel Horse made a transmission for autos that had 1" axles.  I thought all hydros had 1 1/8" axles.  I just hate learning something new everyday. 

[ebinmaine 68,433]

20 minutes ago, stevasaurus said:

  I just hate learning something new everyday. 

I know what you mean Steve. Right there with you. It's okay. Just take a deep breath and we can get through this together.

[gwest_ca-(File Mod) 11,101]

The 1974 B-100 Automatic parts list above states the transmission model is a 5090 on the second page that lists all the transmissions including the C120 and C-160 Auto models. So there is at least 2 automatic models with 1" axles.

The 1975 manual is for the B100 Auto model only.

 

Found

1972 Charger 10 model 1-0410 uses 5090 transaxle with 1" axles.

1973 10hp Auto model 1-0475 uses 5090 transaxle with 1" axles.

1973 10hp Auto model 1-0470 uses 5087 transaxle with 1" axles.

Total now 5 automatic models using 1" axles

 

I posted links to both B-100's because I did not know which B100 Auto he had.

 

Garry

[gwest_ca-(File Mod) 11,101]

Always wondered what the WasteWatcher seals were. You will see it listed on the 9878 seal page posted above.

 

Garry

 

[LFDRET 21]

I got my seal from Motion Ind.   Just want to thank you all for the help

 

Bill