416h Motion Control - Friction Adjustment Bolt

[Tach-a-matic 357]

Hello,

 

When I drove my new tractor for the first time today the motion lever does not stay in the position of choice.  If set at full speed, it gravitates back to slow speed.   

 

Which bolt is tightened down to increase the friction on the lever so it stays where it is set at?

 

 

.

[WVHillbilly520H 10,374]

The one near center slightly right with the 1"+ diameter flat washer that has a 9/16" nut (but first I would take the it completely apart degrease/clean the cam plate and friction washer then put back together, then start your adjustments while you are there you can fix neutral creep speed up forward and/or reverse the procedure is in the downloadable owners manual here on RS) the only lube I would use on all other joints besides the friction washer is dry graphite powder so it doesn't attract dust/chaffe ect, Jeff.

[Tach-a-matic 357]

THANK YOU!

[Tach-a-matic 357]

Just a 1/4 turn and she now holds the speed

 

 

 

[WVHillbilly520H 10,374]

18 minutes ago, Tach-a-matic said:

Just a 1/4 turn and she now holds the speed

 

 

 

Way to go ...gotta love the Onan sound, wait till you get it in snow up on the governor.

Edited August 5, 2018 by WVHillbilly520H