check my gears please, 3 spd unidrive

[WHNJ701 4,165]

I had this in the shop found this trans a few years ago, it didn't shift, shift forks were rusted, and no oil in it.  I got bored took it all apart, before I go and order all the new needle bearings could someone decide if these gears are still ok to use?  they still mesh somewhat ok, all the other gears are seem fine.

Edited July 8, 2018 by jabelman

[WHNJ701 4,165]

it's the input shaft gear and the 2nd/high gear

[wheelhorseman 3,211]

Here is a picture of a bad gear and new gear side by side yours is wore if you put it back together like that it will pop out of 3rd gear while driving.

[WHNJ701 4,165]

thanks that kinda what I thought, what do you think of the input gear, is it supposed to be beveled.  

so the big question is that 2nd/high gear available or is not even worth rebuilding?

[wheelhorseman 3,211]

Yes they are available here is the link to them, look through the pictures you’ll see other pictures of the gears and You will see pictures of the input shaft.

 

https://www.wheelhorsepartsandmore.com/transmissions.html#!/3523-3rd-gear/p/84932562/category=23548039