motor12 367 #1 Posted June 20, 2018 Does anyone have a cut away drawing of the (Eaton SAF-T-VUE) oil bath air cleaner used on some 60s/70s Kohler K90/91 engines. I have one that is missing the mesh that is coated in oil. Also what substitute material can be used as I am sure any OEM stuff is no where to be found. Any good pictures would help also thanks. 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,243 #2 Posted June 20, 2018 Would the stainless steel balls/pads that are sold as pot scrubbers work? Should last forever. Garry 1 Share this post Link to post Share on other sites
AMC RULES 37,146 #3 Posted June 21, 2018 You mean this stuff? Try this Ebay search..."oil bath air cleaner element" 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,243 #4 Posted June 21, 2018 As long as it is not steel which could rust and break down in time and get sucked into the engine. Garry Share this post Link to post Share on other sites
Kurt-NEPA 755 #5 Posted June 22, 2018 (edited) Long shot, but you might try the mesh from a Ford 8N tractor oil bath cleaner. Probably have to cut it down. Try this. https://www.just8ns.com/8N9601-Years-All-Wire-Mesh-Air-Cleaner-2-REQUIRED Edited June 23, 2018 by Kurt-NEPA 1 Share this post Link to post Share on other sites
motor12 367 #6 Posted June 23, 2018 Thanks guys, think the stainless steel scrubbing balls will work the best for this application. I stretched and pulled on one to see if any small bits would come off and they didn't. After coated in 40 wt. oil the should work fine. Share this post Link to post Share on other sites
